MARVEL/hpw421
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases 1 Wiki Activity

发布 HPW421 V1.3 GPIO5 单继电器固件

Browse Source
This commit is contained in:
吴琪
2026-07-17 12:07:19 +08:00
parent 98f2bdeda7
commit 21a44c759d
13 changed files with 33 additions and 88 deletions
Download Patch File Download Diff File Expand all files Collapse all files
project/example/ble/ble_peripheral/app/api/app_task.h
+1 -1
View File
@@ -49,7 +49,7 @@
}
/// Default Device Name
#define APP_DFLT_DEVICE_NAME ("HPW422")
#define APP_DFLT_DEVICE_NAME ("HPW421")
#define APP_DFLT_DEVICE_NAME_LEN (sizeof(APP_DFLT_DEVICE_NAME))//must not be greater than APP_DEVICE_NAME_MAX_LEN
#define APP_SINGLEOTA_DEVICE_NAME "OTA_TEST"
#define APP_SINGLEOTA_DEVICE_NAME_LEN (sizeof(APP_SINGLEOTA_DEVICE_NAME))
project/example/ble/ble_peripheral/app/src/fmc_spi_1.c
+5 -1
View File
@@ -1,6 +1,7 @@
#include "fmc_spi_1.h"
#include "xc_drv_fmc_spi.h"
#include "rf433.h"
#include <string.h>
uint8_t r_data[256];
@@ -54,8 +55,11 @@ void read_user_data(void)
adress_ch1_index = r_data[22];
adress_ch2_index = r_data[23];
flash_ch1_state=r_data[24];
flash_ch1_state=0;
flash_ch2_state=r_data[25];
memset(adress_H_ch1, 0, sizeof(adress_H_ch1));
memset(adress_L_ch1, 0, sizeof(adress_L_ch1));
adress_ch1_index = 0;
}
}
project/example/ble/ble_peripheral/app/src/rf433.c
+11 -51
View File
@@ -42,7 +42,7 @@ uint8_t adress_ch2_index = 0; // 通道2地址索引（0-4）
uint8_t match_ch = 0; // 匹配到的通道（1=GPIO5，2=GPIO2）
#define MATCH_CH1 (1 << 0) // 通道1匹配标记
#define MATCH_CH1 0 // HPW421 不使用通道1
#define MATCH_CH2 (1 << 1) // 通道2匹配标记
@@ -94,29 +94,18 @@ void chx_gpio_init(void)
GPIO_InitCfg.Dir = GPIO_DIR_OUTPUT; // 输出方向
GPIO_InitCfg.Int = NOT_INT; // 不使能中断
GPIO_InitCfg.Pin = RELAY_CH1_PIN; // 设置通道5引脚
xc_gpio_init(&GPIO_InitCfg); // 初始化GPIO
GPIO_InitCfg.Dir = GPIO_DIR_OUTPUT; // 输出方向
GPIO_InitCfg.Int = NOT_INT; // 不使能中断
GPIO_InitCfg.Pin = RELAY_CH2_PIN; // 设置通道2引脚
xc_gpio_init(&GPIO_InitCfg); // 初始化GPIO
if(flash_ch1_state==1)
{
xc_gpio_write_pin(GPIO_5,GPIO_PIN_SET);
}
else
{
xc_gpio_write_pin(GPIO_5,GPIO_PIN_RESET);
}
if(flash_ch2_state==1)
{
xc_gpio_write_pin(GPIO_2,GPIO_PIN_SET);
xc_gpio_write_pin(RELAY_CH2_PIN,GPIO_PIN_SET);
}
else
{
xc_gpio_write_pin(GPIO_2,GPIO_PIN_RESET);
xc_gpio_write_pin(RELAY_CH2_PIN,GPIO_PIN_RESET);
}
}
@@ -154,7 +143,7 @@ void app_key_callback_handler(uint16_t key_value) //按键回调函数
case MODE_DOUBLE_CLICK: //双击
key_state=KEY_SHORT;
power=4;
power=3;
led_state=2;
break;
@@ -181,7 +170,7 @@ void ble_mode_scan(void)
case 1:
receive_mode=0;
key_state=KEY_SHORT;
power=4;
power=3;
led_state=2;
break;
@@ -214,54 +203,31 @@ void _433_fun(void)
{
case 0x03: //如果是3键遥控或者是正方形白色遥控
if(match_ch & MATCH_CH2){
xc_gpio_toggle_pin(GPIO_2);
flash_ch2_state=xc_gpio_read_pin(GPIO_2);
xc_gpio_toggle_pin(RELAY_CH2_PIN);
flash_ch2_state=xc_gpio_read_pin(RELAY_CH2_PIN);
ble_state_mark_dirty(BLE_STATE_DIRTY_OUTPUT | BLE_STATE_DIRTY_RF433);
}
if(match_ch & MATCH_CH1){
xc_gpio_toggle_pin(GPIO_5);
flash_ch1_state=xc_gpio_read_pin(GPIO_5);
ble_state_mark_dirty(BLE_STATE_DIRTY_OUTPUT | BLE_STATE_DIRTY_RF433);
}
break;
case 0x04: //如果是黑色长方形遥控或者椭圆遥控关闭按键
if(match_ch & MATCH_CH2)
{
xc_gpio_write_pin(GPIO_2,GPIO_PIN_RESET);
flash_ch2_state=xc_gpio_read_pin(GPIO_2);
xc_gpio_write_pin(RELAY_CH2_PIN,GPIO_PIN_RESET);
flash_ch2_state=xc_gpio_read_pin(RELAY_CH2_PIN);
ble_state_mark_dirty(BLE_STATE_DIRTY_OUTPUT | BLE_STATE_DIRTY_RF433);
}
if(match_ch & MATCH_CH1)
{
xc_gpio_write_pin(GPIO_5,GPIO_PIN_RESET);
flash_ch1_state=xc_gpio_read_pin(GPIO_5);
ble_state_mark_dirty(BLE_STATE_DIRTY_OUTPUT | BLE_STATE_DIRTY_RF433);
}
break;
case 0x02: //如果是黑色长方形遥控或者椭圆遥控打开按键
if(match_ch & MATCH_CH2)
{
xc_gpio_write_pin(GPIO_2,GPIO_PIN_SET);
flash_ch2_state=xc_gpio_read_pin(GPIO_2);
xc_gpio_write_pin(RELAY_CH2_PIN,GPIO_PIN_SET);
flash_ch2_state=xc_gpio_read_pin(RELAY_CH2_PIN);
ble_state_mark_dirty(BLE_STATE_DIRTY_OUTPUT | BLE_STATE_DIRTY_RF433);
}
if(match_ch & MATCH_CH1)
{
xc_gpio_write_pin(GPIO_5,GPIO_PIN_SET);
flash_ch1_state=xc_gpio_read_pin(GPIO_5);
ble_state_mark_dirty(BLE_STATE_DIRTY_OUTPUT | BLE_STATE_DIRTY_RF433);
}
break;
@@ -286,9 +252,6 @@ void scan_433(void)
if(rf433_sw_flag==1)
{
rf433_sw_flag=0;
power=4;
key_state=KEY_SHORT;
led_state=2;
}
else if(rf433_sw_flag==2)
{
@@ -436,6 +399,3 @@ void scan_433(void)
}
}
project/example/ble/ble_peripheral/app/src/rf433.h
+1 -2
View File
@@ -11,7 +11,7 @@
#define RF_DATA xc_gpio_read_pin(GPIO_0) //RF433接收引脚,根据具体单片机定义引脚
#define RELAY_CH1_PIN (GPIO_5)
#define RELAY_CH2_PIN (GPIO_2)
#define RELAY_CH2_PIN (GPIO_5) /* HPW421: protocol channel 2 relay */
#define KEY_LONG 1
#define KEY_SHORT 2
@@ -90,4 +90,3 @@ void scan_433(void);
#endif
project/example/ble/ble_peripheral/app/src/switch_s.c
+1 -3
View File
@@ -83,7 +83,6 @@ void switch_init(void)
void trigger_check_process(void)
{
if(S1_first_on_state==1)
{
S1_first_on_state=0;
@@ -303,7 +302,7 @@ void trigger_check_process(void)
//printf("对码 trig1_cnt %d\r\n",trig1_cnt);
if( s1_state == DB_IDLE)
{
rf433_sw_flag = 1;
rf433_sw_flag = 1;
trig1_cnt = 0;
trig1_wait = 0;
}
@@ -428,4 +427,3 @@ void gpio_intr_callback(uint64_t intr_sta)
}
}
}
project/example/ble/ble_peripheral/app/src/switch_s.h
-1
View File
@@ -45,4 +45,3 @@ void trigger_check_process(void);
#endif
project/example/ble/ble_peripheral/app/src/uart_1.c
+7 -17
View File
@@ -28,18 +28,12 @@ void scan_uart(uint8_t *arr)
//LOGI("%02x %02x %02x %02x %02x %02x\r\n",user_rx_buf[0],user_rx_buf[1],user_rx_buf[2],user_rx_buf[3],user_rx_buf[4],user_rx_buf[5]);
switch(user_rx_buf[4])
{
case 0x01:
switch(user_rx_buf[1])
{
case 0x01:
xc_gpio_toggle_pin(GPIO_5);
flash_ch1_state=xc_gpio_read_pin(GPIO_5);
flash_run();
break;
case 0x02:
xc_gpio_toggle_pin(GPIO_2);
flash_ch2_state=xc_gpio_read_pin(GPIO_2);
case 0x01:
switch(user_rx_buf[1])
{
case 0x02:
xc_gpio_toggle_pin(RELAY_CH2_PIN);
flash_ch2_state=xc_gpio_read_pin(RELAY_CH2_PIN);
flash_run();
break;
@@ -53,11 +47,7 @@ void scan_uart(uint8_t *arr)
case 0x02:
switch(user_rx_buf[1])
{
case 0x04:
receive_mode=1;
break;
case 0x05:
case 0x05:
receive_mode=2;
break;
project/example/ble/ble_peripheral/app/src/usr_server.c
+5 -10
View File
@@ -13,10 +13,10 @@
*/
#include "usr_server.h"
#include "uart_1.h"
#include "rf433.h"
#include "xc_drv_gpio.h"
#if (BLE_APP_PRESENT)
extern uint8_t adress_ch1_index;
extern uint8_t adress_ch2_index;
uint8_t srv_user_lid = GATT_INVALID_USER_LID;
@@ -83,9 +83,6 @@ static uint8_t ble_state_output_mask(void)
uint8_t mask = 0;
if (xc_gpio_read_pin(GPIO_5)) {
mask |= 0x01;
}
if (xc_gpio_read_pin(GPIO_2)) {
mask |= 0x02;
}
return mask;
@@ -108,7 +105,7 @@ static uint8_t ble_state_fill_packet(uint8_t *data)
data[7] = FIRMWARE_VERSION_MAJOR;
data[8] = FIRMWARE_VERSION_MINOR;
data[9] = FIRMWARE_VERSION_PATCH;
data[10] = adress_ch1_index;
data[10] = 0;
data[11] = adress_ch2_index;
data[12] = 0;
data[13] = 0;
@@ -118,12 +115,11 @@ static uint8_t ble_state_fill_packet(uint8_t *data)
static void ble_state_detect_changes(void)
{
uint8_t output = ble_state_output_mask();
uint8_t ch1_count = adress_ch1_index;
uint8_t ch2_count = adress_ch2_index;
if (!ble_state_last_valid) {
ble_state_last_output = output;
ble_state_last_ch1_count = ch1_count;
ble_state_last_ch1_count = 0;
ble_state_last_ch2_count = ch2_count;
ble_state_last_valid = 1;
return;
@@ -134,9 +130,8 @@ static void ble_state_detect_changes(void)
ble_state_mark_dirty(BLE_STATE_DIRTY_OUTPUT);
}
if ((ble_state_last_ch1_count != ch1_count) ||
(ble_state_last_ch2_count != ch2_count)) {
ble_state_last_ch1_count = ch1_count;
if (ble_state_last_ch2_count != ch2_count) {
ble_state_last_ch1_count = 0;
ble_state_last_ch2_count = ch2_count;
ble_state_mark_dirty(BLE_STATE_DIRTY_RF433);
}
project/example/ble/ble_peripheral/app/src/usr_server.h
+1 -1
View File
@@ -21,7 +21,7 @@
#include "xc_gatt_server_api.h"
#define CUSTOM_SVC_UUID 0xFFF0
#define CUSTOM_SVC_RX_CHAR_UUID 0xFFE2
#define CUSTOM_SVC_RX_CHAR_UUID 0xFFE1
#define CUSTOM_SVC_TX_CHAR_UUID 0xFFF4
#define CUSTOM_SVC_RX_CHAR_VAL_MAX_LENGTH 120
#define CUSTOM_SVC_TX_CHAR_VAL_MAX_LENGTH 120