V1.0

2026-06-09 16:39:17 +08:00
commit 41a602f89c
3057 changed files with 771495 additions and 0 deletions
@@ -0,0 +1,194 @@
+#ifndef _RF433_H_
+#define _RF433_H_
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+
+///*
+//   09   07  01  03
+//	  
+//	 
+//	 
+//   0B  05  0A  0C 
+//*/
+
+
+//#define  ON_OFF   				 0X03  //开关
+
+//#define  Mode_choose      0X01  //七彩
+
+//#define  Brightness_L          0X09  //
+
+//#define  Brightness_H          0X07  
+
+//#define  Time_1h               0x0B  
+
+//#define  Time_2h               0x05  
+
+//#define  Speed_add             0x0C  
+
+//#define  Speed_dow             0x0A  
+
+
+//#define  ON  				       0XF1 //开关
+
+//#define  OFF      				 0XF0  //七彩
+
+//#define  Mode_add          0XF2  //
+
+//#define  Mode_dow          0XF3  
+
+//#define  Brightness_H               0xF4  
+
+//#define  Brightness_L               0xF5  
+
+//椭圆
+#define  ON  				       0X02 //开关
+
+#define  OFF      				 0X04  //七彩
+
+#define  Mode_add          0X06  //
+
+#define  Mode_dow          0X0E  
+
+#define  Brightness_H      0x08  
+
+#define  Brightness_L      0x0D
+
+#define  Speed_H           0x08  
+
+#define  Speed_L           0x0D  
+
+
+
+//扁形
+#define  B_Brightness_H      0x00  
+
+#define  B_Brightness_L      0x0F
+
+#define  B_Speed_L      0x0A    //F_Speed_dow  0x0A
+
+#define  B_Speed_H      0x0C //  F_Speed_add             0x0C  
+
+
+//方形
+#define  F_ON_OFF   				     0X03  //开关
+
+#define  F_Mode_choose           0X01  //七彩
+
+#define  F_Brightness_100        0X07  //
+
+#define  F_Brightness_10         0X09  
+
+#define  F_Time_1h               0x0B  
+
+#define  F_Time_2h               0x05  
+
+#define  F_Speed_add             0x0C  
+
+#define  F_Speed_dow             0x0A  
+
+
+
+//#define  RF_DATA        P15		//RF433接收引脚,根据具体单片机定义引脚
+
+//#define  RF433_PIN      GPIO_5		//RF433接收引脚,根据具体单片机定义引脚
+
+//#define  RF_DATA        P15//RF433接收引脚,根据具体单片机定义引脚
+
+
+#define  RF_DATA        xc_gpio_read_pin(GPIO_5)		//RF433接收引脚,根据具体单片机定义引脚
+
+#define  RF433_PIN      GPIO_5		//RF433接收引脚,根据具体单片机定义引脚
+#define  RF_dd          GPIO_0		//
+
+
+#define frames_time        70     //该值要大于68,68指代通过逻辑分析仪抓取一帧的时间   
+#define LongPress_time     100     //长按时间  100ms触发一次
+#define Short_time         60      //  时间  60ms触发一次 
+//enum
+//{
+//    SHUT_DOWN,
+//    POWER_ON
+//};
+
+enum
+{
+    LOW_LEVEL,  //0
+    HIGH_LEVEL  //1
+};
+
+enum
+{
+	FAIL,
+	SUCCESS
+};
+
+enum
+{
+    NOMATCH,
+    MATCHED
+};
+
+struct receive_data_page//接收数据包结构
+{
+    unsigned char idh;
+    unsigned char idl;
+    unsigned char key_value;
+};
+struct address
+{
+    unsigned char address_l;
+    unsigned char address_h;
+};
+union rf433_flag
+{
+    struct
+    {
+        unsigned char study: 1;         //表示占用1位
+        unsigned char long_press_flag:1;
+				unsigned char short_press_flag:1;
+        unsigned char current_level: 1;
+        unsigned char sync_code: 1;
+        unsigned char decode_success_flag:1;     //松手检测标志
+        unsigned char new_remote_flag:1;
+        unsigned char receive_finish: 1;
+				unsigned char raised_long_press_flag: 1;
+    } rf_receive_flag;
+    unsigned char flag;
+}; //联合体赋初值 rf_flag = {0}
+
+
+				
+extern union rf433_flag rf_flag;				
+extern struct receive_data_page Receive_data_page;				
+extern struct address Remote_adress;	
+extern uint8_t match_success;
+extern unsigned char match_time_over_flag;
+extern uint32_t receive_data;
+extern uint32_t  flag_1h;
+extern uint8_t   is_time;
+extern uint32_t  adress;
+extern unsigned char  receive_data_cnt;
+
+extern uint8_t res_data;
+
+
+extern uint8_t adress_H;
+extern uint8_t adress_L;
+extern uint8_t adress_H_array[5];
+extern uint8_t adress_L_array[5];
+extern uint8_t long_flag_s;
+
+
+void rf433_receive();
+void rf433_gpio_init();
+void scan_433();
+void Lock_Pwm7xd();
+void Delay_50us();
+void Encoder_key();
+
+
+#endif
+