PWM32EPRO V3.0：新增方形八键遥控支持
新增八键功能：0x03开关、0x01模式切换、0x07静态暖光W、0x09静态冷光C、0x0B亮度增加、0x05亮度降低、0x0C减速、0x0A加速。静态和动态模式均支持亮度调节，动态模式支持10档速度，模式键循环切换。 修正方形遥控宏定义命名；模式、亮度和速度键复用500ms长按重复处理。沿用原固定窗口433解码及通码/地址过滤机制，最多保存5个遥控；对码窗口内长按冷光C键对码、暖光W键清码。433接收GPIO5及外接按键禁用配置保持不变。 版本更新为V3.0，同步编译产物、完整烧录BIN与OTA文件，校验码15811E00；release/online仅保留最新文件。已完成编译链接及发布文件一致性检查。此前无输出、无蓝牙广播问题仍待硬件复测确认，本次不标记为已解决。
This commit is contained in:
@@ -73,21 +73,21 @@
|
||||
|
||||
|
||||
//方形
|
||||
#define F_ON_OFF 0X03 //开关
|
||||
#define F_KEY_POWER_TOGGLE 0x03U // power toggle
|
||||
|
||||
#define F_Mode_choose 0X01 //七彩
|
||||
#define F_KEY_MODE_NEXT 0x01U // next mode
|
||||
|
||||
#define F_Brightness_100 0X07 //
|
||||
#define F_KEY_WARM_STATIC 0x07U // static warm
|
||||
|
||||
#define F_Brightness_10 0X09
|
||||
#define F_KEY_COOL_STATIC 0x09U // static cool
|
||||
|
||||
#define F_Time_1h 0x0B
|
||||
#define F_KEY_BRIGHTNESS_UP 0x0BU // brightness +
|
||||
|
||||
#define F_Time_2h 0x05
|
||||
#define F_KEY_BRIGHTNESS_DOWN 0x05U // brightness -
|
||||
|
||||
#define F_Speed_add 0x0C
|
||||
#define F_KEY_SPEED_DOWN 0x0CU // speed -
|
||||
|
||||
#define F_Speed_dow 0x0A
|
||||
#define F_KEY_SPEED_UP 0x0AU // speed +
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -227,7 +227,7 @@ static uint8_t Pairing_IsTriggerCommand(uint8_t command)
|
||||
{
|
||||
return command == Brightness_H || command == Brightness_L ||
|
||||
command == B_Brightness_H || command == B_Brightness_L ||
|
||||
command == F_Brightness_10 || command == F_Brightness_100;
|
||||
command == F_KEY_COOL_STATIC || command == F_KEY_WARM_STATIC;
|
||||
}
|
||||
|
||||
static void Pairing_Replay_Deferred(void)
|
||||
@@ -353,7 +353,7 @@ static void Encoder_key_NoCode(){
|
||||
if(ssse != 0U || time_5s > PAIRING_WINDOW_TICKS) return;
|
||||
if(!(res_data==Brightness_H||res_data==Brightness_L||
|
||||
res_data==B_Brightness_H||res_data==B_Brightness_L||
|
||||
res_data==F_Brightness_10||res_data==F_Brightness_100))
|
||||
res_data==F_KEY_COOL_STATIC||res_data==F_KEY_WARM_STATIC))
|
||||
{
|
||||
return;
|
||||
}
|
||||
@@ -399,7 +399,7 @@ static void Encoder_key_NoCode(){
|
||||
long_press_cnt=0;
|
||||
pair_deferred_command=0U;
|
||||
|
||||
if(res_data==Brightness_H||res_data==B_Brightness_H||res_data==F_Brightness_10){
|
||||
if(res_data==Brightness_H||res_data==B_Brightness_H||res_data==F_KEY_COOL_STATIC){
|
||||
adress=receive_data >>8;
|
||||
adress_H = (receive_data >> 16) & 0xff;
|
||||
adress_L = (receive_data >> 8) & 0xff;
|
||||
@@ -415,7 +415,7 @@ static void Encoder_key_NoCode(){
|
||||
match_success=1;
|
||||
Pairing_Feedback_Start(times_s);
|
||||
}
|
||||
else if(res_data==Brightness_L||res_data==B_Brightness_L||res_data==F_Brightness_100){
|
||||
else if(res_data==Brightness_L||res_data==B_Brightness_L||res_data==F_KEY_WARM_STATIC){
|
||||
pairing_data_changed=1U;
|
||||
adress_H_array[0] = 0xff;
|
||||
adress_L_array[0] = 0xff;
|
||||
@@ -441,7 +441,7 @@ static void Encoder_key_NoCode(){
|
||||
app_pairing_requested = 0U;
|
||||
if(res_data==Brightness_H ||
|
||||
res_data==B_Brightness_H ||
|
||||
res_data==F_Brightness_10)
|
||||
res_data==F_KEY_COOL_STATIC)
|
||||
ble_remote_event_notify(0x0DU, 2U,
|
||||
rf433_paired_count());
|
||||
else
|
||||
@@ -483,7 +483,7 @@ uint32_t KEY_STATE_re=0; //
|
||||
|
||||
//该函数选择那个按键为单击，哪个为长按按键
|
||||
static void set_click(){
|
||||
if(res_data==Mode_add||res_data==Mode_dow||res_data==F_ON_OFF||res_data==F_Mode_choose||res_data==ON||res_data==OFF){
|
||||
if(res_data==Mode_add||res_data==Mode_dow||res_data==F_KEY_POWER_TOGGLE||res_data==F_KEY_MODE_NEXT||res_data==F_KEY_WARM_STATIC||res_data==F_KEY_COOL_STATIC||res_data==ON||res_data==OFF){
|
||||
Key_TypeDef.KEY_STATE_Click=1; //单击
|
||||
}else{
|
||||
Key_TypeDef.KEY_STATE_LONG_PRESS=1; //长按
|
||||
@@ -493,7 +493,12 @@ static void set_click(){
|
||||
|
||||
static uint8_t rf433_is_mode_step_command(uint8_t command)
|
||||
{
|
||||
return command == Mode_add || command == Mode_dow;
|
||||
return command == Mode_add || command == Mode_dow ||
|
||||
command == F_KEY_MODE_NEXT ||
|
||||
command == F_KEY_BRIGHTNESS_UP ||
|
||||
command == F_KEY_BRIGHTNESS_DOWN ||
|
||||
command == F_KEY_SPEED_UP ||
|
||||
command == F_KEY_SPEED_DOWN;
|
||||
}
|
||||
|
||||
/*
|
||||
@@ -593,6 +598,29 @@ void _433_fun(){
|
||||
Stop_PWM();
|
||||
}
|
||||
break;
|
||||
case F_KEY_POWER_TOGGLE:
|
||||
if(deviceStatus==POWEROFF) Start_PWM();
|
||||
else Stop_PWM();
|
||||
break;
|
||||
case F_KEY_MODE_NEXT:
|
||||
if(deviceStatus==POWEROFF) break;
|
||||
if(choose_mode_falsg >= REMOTE_MODE_MAX) choose_mode_falsg=REMOTE_MODE_MIN;
|
||||
else choose_mode_falsg++;
|
||||
choose_mode_bh=0;
|
||||
startTimer(&timer1,1);
|
||||
break;
|
||||
case F_KEY_WARM_STATIC:
|
||||
if(deviceStatus==POWEROFF) Start_PWM();
|
||||
choose_mode_falsg=0U;
|
||||
choose_mode_bh=0U;
|
||||
startTimer(&timer1,1U);
|
||||
break;
|
||||
case F_KEY_COOL_STATIC:
|
||||
if(deviceStatus==POWEROFF) Start_PWM();
|
||||
choose_mode_falsg=1U;
|
||||
choose_mode_bh=0U;
|
||||
startTimer(&timer1,1U);
|
||||
break;
|
||||
case Mode_add:
|
||||
if(POWEROFF==deviceStatus)break;
|
||||
if(choose_mode_falsg>REMOTE_MODE_MAX){
|
||||
@@ -649,6 +677,24 @@ void _433_fun(){
|
||||
if(Speed>SPEED_MIN_LEVEL)Speed--;
|
||||
}
|
||||
break;
|
||||
case F_KEY_BRIGHTNESS_UP:
|
||||
if(deviceStatus==POWEROFF) break;
|
||||
if(Brightness >= (BRIGHTNESS_MAX_PERCENT - BRIGHTNESS_RF_STEP_PERCENT)) Brightness=BRIGHTNESS_MAX_PERCENT;
|
||||
else Brightness+=BRIGHTNESS_RF_STEP_PERCENT;
|
||||
break;
|
||||
case F_KEY_BRIGHTNESS_DOWN:
|
||||
if(deviceStatus==POWEROFF) break;
|
||||
if(Brightness <= (BRIGHTNESS_MIN_PERCENT + BRIGHTNESS_RF_STEP_PERCENT)) Brightness=BRIGHTNESS_MIN_PERCENT;
|
||||
else Brightness-=BRIGHTNESS_RF_STEP_PERCENT;
|
||||
break;
|
||||
case F_KEY_SPEED_UP:
|
||||
if(deviceStatus==POWEROFF || Mode==mode0) break;
|
||||
if(Speed>SPEED_MIN_LEVEL) Speed--;
|
||||
break;
|
||||
case F_KEY_SPEED_DOWN:
|
||||
if(deviceStatus==POWEROFF || Mode==mode0) break;
|
||||
if(Speed<SPEED_MAX_LEVEL) Speed++;
|
||||
break;
|
||||
default:
|
||||
if(POWEROFF==deviceStatus)break;
|
||||
if(res_data>=16&&res_data<=255){
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
@@ -28,19 +28,8 @@ Project File Date: 07/29/2026
|
||||
*** Using Compiler 'V5.06 update 6 (build 750)', folder: 'D:\Program Files\Keil_v5\ARM\ARMCC\Bin'
|
||||
Build target 'ble-sdk-xip_scan'
|
||||
Note: source file '..\app\src\uart.c' - object file renamed from '.\Objects\uart.o' to '.\Objects\uart_1.o'.
|
||||
compiling Rf433.c...
|
||||
..\app\src\RF433.h(185): warning: #1295-D: Deprecated declaration rf433_receive - give arg types
|
||||
void rf433_receive();
|
||||
..\app\src\RF433.h(186): warning: #1295-D: Deprecated declaration rf433_gpio_init - give arg types
|
||||
void rf433_gpio_init();
|
||||
..\app\src\RF433.h(187): warning: #1295-D: Deprecated declaration scan_433 - give arg types
|
||||
void scan_433();
|
||||
..\app\src\RF433.h(188): warning: #1295-D: Deprecated declaration Lock_Pwm7xd - give arg types
|
||||
void Lock_Pwm7xd();
|
||||
..\app\src\RF433.h(189): warning: #1295-D: Deprecated declaration Delay_50us - give arg types
|
||||
void Delay_50us();
|
||||
..\app\src\RF433.h(190): warning: #1295-D: Deprecated declaration Encoder_key - give arg types
|
||||
void Encoder_key();
|
||||
compiling xc_drv_dma.c...
|
||||
compiling xc_drv_pwm.c...
|
||||
..\app\src\mode.h(43): warning: #1295-D: Deprecated declaration choice_mode - give arg types
|
||||
void choice_mode();
|
||||
..\app\src\mode.h(44): warning: #1295-D: Deprecated declaration set_mode - give arg types
|
||||
@@ -51,220 +40,20 @@ compiling Rf433.c...
|
||||
void Stop_PWM();
|
||||
..\app\src\mode.h(47): warning: #1295-D: Deprecated declaration Set_timing - give arg types
|
||||
void Set_timing();
|
||||
..\app\src\pwm.h(137): warning: #1295-D: Deprecated declaration _PWM_INIT - give arg types
|
||||
void _PWM_INIT();
|
||||
..\app\src\pwm.h(143): warning: #1295-D: Deprecated declaration adc_Init - give arg types
|
||||
void adc_Init();
|
||||
..\app\src\pwm.h(144): warning: #1295-D: Deprecated declaration My_ADC_Get_Value - give arg types
|
||||
void My_ADC_Get_Value();
|
||||
..\app\src\pwm.h(145): warning: #1295-D: Deprecated declaration gpio_pullup_input_inter_test - give arg types
|
||||
void gpio_pullup_input_inter_test();
|
||||
..\app\src\Rf433.c(659): warning: #223-D: function "temperature" declared implicitly
|
||||
temperature((uint8_t)(((uint16_t)(255U - res_data) * 255U + 119U) / 239U));
|
||||
..\app\src\Rf433.c(24): warning: #177-D: variable "POWER_flag" was declared but never referenced
|
||||
static uint8_t POWER_flag;
|
||||
..\app\src\Rf433.c: 17 warnings, 0 errors
|
||||
compiling app_sec.c...
|
||||
..\app\src\app_sec.c(414): warning: #177-D: variable "param" was declared but never referenced
|
||||
struct gapc_encrypt_req_ind const *param = (struct gapc_encrypt_req_ind const *)p_param;
|
||||
..\app\src\app_sec.c: 1 warning, 0 errors
|
||||
compiling app_task.c...
|
||||
..\app\src\app_task.c(450): warning: #223-D: function "ke_timer_set" declared implicitly
|
||||
ke_timer_set(APP_SECOND_ADV_START, TASK_APP, 400); // start open noconnect adv
|
||||
..\app\src\app_task.c(463): warning: #61-D: integer operation result is out of range
|
||||
value &= ~(0xff << 24);
|
||||
..\app\src\app_task.c(473): warning: #223-D: function "custom_svc_add" declared implicitly
|
||||
if (!custom_svc_add()) {
|
||||
..\app\src\app_task.c(496): warning: #223-D: function "ke_timer_set" declared implicitly
|
||||
ke_timer_set(APP_SCAN_START, TASK_APP, 10);
|
||||
..\app\src\app_task.c(640): warning: #177-D: variable "p_param" was declared but never referenced
|
||||
struct gapm_ext_adv_report_ind *p_param = (struct gapm_ext_adv_report_ind *)param;
|
||||
..\app\src\app_task.c(688): warning: #223-D: function "xc_ble_gatt_cli_mtu_exch" declared implicitly
|
||||
xc_ble_gatt_cli_mtu_exch(conidx, app_env.user_lid);
|
||||
..\app\src\app_task.c(804): warning: #223-D: function "ke_timer_set" declared implicitly
|
||||
ke_timer_set(APP_SCAN_STOP, TASK_APP, 200); // start open noconnect adv
|
||||
..\app\src\app_task.c(818): warning: #223-D: function "ke_timer_set" declared implicitly
|
||||
ke_timer_set(APP_SCAN_START, TASK_APP, 900); // start open noconnect adv
|
||||
..\app\src\app_task.c(835): warning: #223-D: function "app_switch_mode" declared implicitly
|
||||
app_switch_mode(app_mode);
|
||||
..\app\src\app_task.c(836): warning: #940-D: missing return statement at end of non-void function "app_mode_switch_handler"
|
||||
}
|
||||
..\app\src\app_task.c(837): warning: #159-D: declaration is incompatible with previous "app_switch_mode" (declared at line 835)
|
||||
void app_switch_mode(uint8_t mode)
|
||||
..\app\src\app_task.c(845): warning: #223-D: function "ke_timer_set" declared implicitly
|
||||
ke_timer_set(APP_SECOND_ADV_START, TASK_APP, 400); // start open noconnect adv
|
||||
..\app\src\app_task.c(306): warning: #177-D: function "app_get_handler" was declared but never referenced
|
||||
static uint8_t app_get_handler(const struct app_subtask_handlers *handler_list_desc, ke_msg_id_t msgid, void *p_param,
|
||||
..\app\src\app_task.c: 13 warnings, 0 errors
|
||||
compiling ota_protocol.c...
|
||||
..\app\src\ota_protocol.c(35): warning: #120-D: return value type does not match the function type
|
||||
return &fota_env;
|
||||
..\app\src\ota_protocol.c(149): warning: #550-D: variable "sw_ver" was set but never used
|
||||
uint16_t sw_ver;
|
||||
..\app\src\ota_protocol.c(150): warning: #550-D: variable "rom_ver" was set but never used
|
||||
uint16_t rom_ver;
|
||||
..\app\src\ota_protocol.c(292): warning: #177-D: label "defult" was declared but never referenced
|
||||
defult:
|
||||
..\app\src\ota_protocol.c(320): warning: #223-D: function "ble_flash_later_page_erase" declared implicitly
|
||||
ble_flash_later_page_erase(OTA_PARAM_ADDR);
|
||||
..\app\src\ota_protocol.c: 5 warnings, 0 errors
|
||||
compiling rgblight.c...
|
||||
compiling ota_server.c...
|
||||
compiling app_batt.c...
|
||||
compiling arch_main.c...
|
||||
..\app\src\pwm.h(137): warning: #1295-D: Deprecated declaration _PWM_INIT - give arg types
|
||||
void _PWM_INIT();
|
||||
..\app\src\pwm.h(143): warning: #1295-D: Deprecated declaration adc_Init - give arg types
|
||||
void adc_Init();
|
||||
..\app\src\pwm.h(144): warning: #1295-D: Deprecated declaration My_ADC_Get_Value - give arg types
|
||||
void My_ADC_Get_Value();
|
||||
..\app\src\pwm.h(145): warning: #1295-D: Deprecated declaration gpio_pullup_input_inter_test - give arg types
|
||||
void gpio_pullup_input_inter_test();
|
||||
..\app\src\mode.h(43): warning: #1295-D: Deprecated declaration choice_mode - give arg types
|
||||
void choice_mode();
|
||||
..\app\src\mode.h(44): warning: #1295-D: Deprecated declaration set_mode - give arg types
|
||||
void set_mode();
|
||||
..\app\src\mode.h(45): warning: #1295-D: Deprecated declaration Start_PWM - give arg types
|
||||
void Start_PWM();
|
||||
..\app\src\mode.h(46): warning: #1295-D: Deprecated declaration Stop_PWM - give arg types
|
||||
void Stop_PWM();
|
||||
..\app\src\mode.h(47): warning: #1295-D: Deprecated declaration Set_timing - give arg types
|
||||
void Set_timing();
|
||||
..\app\src\RF433.h(185): warning: #1295-D: Deprecated declaration rf433_receive - give arg types
|
||||
void rf433_receive();
|
||||
..\app\src\RF433.h(186): warning: #1295-D: Deprecated declaration rf433_gpio_init - give arg types
|
||||
void rf433_gpio_init();
|
||||
..\app\src\RF433.h(187): warning: #1295-D: Deprecated declaration scan_433 - give arg types
|
||||
void scan_433();
|
||||
..\app\src\RF433.h(188): warning: #1295-D: Deprecated declaration Lock_Pwm7xd - give arg types
|
||||
void Lock_Pwm7xd();
|
||||
..\app\src\RF433.h(189): warning: #1295-D: Deprecated declaration Delay_50us - give arg types
|
||||
void Delay_50us();
|
||||
..\app\src\RF433.h(190): warning: #1295-D: Deprecated declaration Encoder_key - give arg types
|
||||
void Encoder_key();
|
||||
..\app\src\arch_main.c(163): warning: #223-D: function "xc_fmc_spi_init_oprt" declared implicitly
|
||||
xc_fmc_spi_init_oprt();
|
||||
..\app\src\arch_main.c(164): warning: #223-D: function "xc_fmc_spi_flash_wake_up" declared implicitly
|
||||
xc_fmc_spi_flash_wake_up();
|
||||
..\app\src\arch_main.c(166): warning: #223-D: function "xc_fmc_spi_flash_rdid" declared implicitly
|
||||
xc_fmc_spi_flash_rdid((uint8_t *)&mid);
|
||||
..\app\src\arch_main.c(171): warning: #223-D: function "xc_fmc_spi_flash_ruid" declared implicitly
|
||||
xc_fmc_spi_flash_ruid(ruid);
|
||||
..\app\src\arch_main.c(188): warning: #223-D: function "xc_unique_identification_read" declared implicitly
|
||||
if (false == xc_unique_identification_read(co_default_bdaddr.addr)) {
|
||||
..\app\src\arch_main.c(161): warning: #177-D: variable "flash_size" was declared but never referenced
|
||||
uint32_t flash_size;
|
||||
..\app\src\arch_main.c(162): warning: #177-D: variable "flash_type" was declared but never referenced
|
||||
uint16_t flash_type;
|
||||
..\app\src\arch_main.c(215): warning: #144-D: a value of type "uint32_t *" cannot be used to initialize an entity of type "uint8_t *"
|
||||
uint8_t *ptr = (uint32_t *)(0x10000800);
|
||||
..\app\src\arch_main.c(375): warning: #188-D: enumerated type mixed with another type
|
||||
wdt_cfg.ReloadValue = WDT_CLK_32K_RESET_MODE0_8192MS;
|
||||
..\app\src\arch_main.c(395): warning: #223-D: function "xc_fmc_spi_init_oprt" declared implicitly
|
||||
xc_fmc_spi_init_oprt( );
|
||||
..\app\src\arch_main.c(396): warning: #223-D: function "xc_fmc_spi_flash_wake_up" declared implicitly
|
||||
xc_fmc_spi_flash_wake_up();
|
||||
..\app\src\arch_main.c(462): warning: #223-D: function "TaskProcess" declared implicitly
|
||||
TaskProcess();
|
||||
..\app\src\arch_main.c: 27 warnings, 0 errors
|
||||
compiling Mode.c...
|
||||
..\app\src\pwm.h(137): warning: #1295-D: Deprecated declaration _PWM_INIT - give arg types
|
||||
void _PWM_INIT();
|
||||
..\app\src\pwm.h(143): warning: #1295-D: Deprecated declaration adc_Init - give arg types
|
||||
void adc_Init();
|
||||
..\app\src\pwm.h(144): warning: #1295-D: Deprecated declaration My_ADC_Get_Value - give arg types
|
||||
void My_ADC_Get_Value();
|
||||
..\app\src\pwm.h(145): warning: #1295-D: Deprecated declaration gpio_pullup_input_inter_test - give arg types
|
||||
void gpio_pullup_input_inter_test();
|
||||
..\app\src\mode.h(43): warning: #1295-D: Deprecated declaration choice_mode - give arg types
|
||||
void choice_mode();
|
||||
..\app\src\mode.h(44): warning: #1295-D: Deprecated declaration set_mode - give arg types
|
||||
void set_mode();
|
||||
..\app\src\mode.h(45): warning: #1295-D: Deprecated declaration Start_PWM - give arg types
|
||||
void Start_PWM();
|
||||
..\app\src\mode.h(46): warning: #1295-D: Deprecated declaration Stop_PWM - give arg types
|
||||
void Stop_PWM();
|
||||
..\app\src\mode.h(47): warning: #1295-D: Deprecated declaration Set_timing - give arg types
|
||||
void Set_timing();
|
||||
..\app\src\RF433.h(185): warning: #1295-D: Deprecated declaration rf433_receive - give arg types
|
||||
void rf433_receive();
|
||||
..\app\src\RF433.h(186): warning: #1295-D: Deprecated declaration rf433_gpio_init - give arg types
|
||||
void rf433_gpio_init();
|
||||
..\app\src\RF433.h(187): warning: #1295-D: Deprecated declaration scan_433 - give arg types
|
||||
void scan_433();
|
||||
..\app\src\RF433.h(188): warning: #1295-D: Deprecated declaration Lock_Pwm7xd - give arg types
|
||||
void Lock_Pwm7xd();
|
||||
..\app\src\RF433.h(189): warning: #1295-D: Deprecated declaration Delay_50us - give arg types
|
||||
void Delay_50us();
|
||||
..\app\src\RF433.h(190): warning: #1295-D: Deprecated declaration Encoder_key - give arg types
|
||||
void Encoder_key();
|
||||
..\app\src\Mode.c: 15 warnings, 0 errors
|
||||
compiling timeslice.c...
|
||||
..\app\src\mode.h(43): warning: #1295-D: Deprecated declaration choice_mode - give arg types
|
||||
void choice_mode();
|
||||
..\app\src\mode.h(44): warning: #1295-D: Deprecated declaration set_mode - give arg types
|
||||
void set_mode();
|
||||
..\app\src\mode.h(45): warning: #1295-D: Deprecated declaration Start_PWM - give arg types
|
||||
void Start_PWM();
|
||||
..\app\src\mode.h(46): warning: #1295-D: Deprecated declaration Stop_PWM - give arg types
|
||||
void Stop_PWM();
|
||||
..\app\src\mode.h(47): warning: #1295-D: Deprecated declaration Set_timing - give arg types
|
||||
void Set_timing();
|
||||
..\app\src\RF433.h(185): warning: #1295-D: Deprecated declaration rf433_receive - give arg types
|
||||
void rf433_receive();
|
||||
..\app\src\RF433.h(186): warning: #1295-D: Deprecated declaration rf433_gpio_init - give arg types
|
||||
void rf433_gpio_init();
|
||||
..\app\src\RF433.h(187): warning: #1295-D: Deprecated declaration scan_433 - give arg types
|
||||
void scan_433();
|
||||
..\app\src\RF433.h(188): warning: #1295-D: Deprecated declaration Lock_Pwm7xd - give arg types
|
||||
void Lock_Pwm7xd();
|
||||
..\app\src\RF433.h(189): warning: #1295-D: Deprecated declaration Delay_50us - give arg types
|
||||
void Delay_50us();
|
||||
..\app\src\RF433.h(190): warning: #1295-D: Deprecated declaration Encoder_key - give arg types
|
||||
void Encoder_key();
|
||||
..\app\src\pwm.h(137): warning: #1295-D: Deprecated declaration _PWM_INIT - give arg types
|
||||
void _PWM_INIT();
|
||||
..\app\src\pwm.h(143): warning: #1295-D: Deprecated declaration adc_Init - give arg types
|
||||
void adc_Init();
|
||||
..\app\src\pwm.h(144): warning: #1295-D: Deprecated declaration My_ADC_Get_Value - give arg types
|
||||
void My_ADC_Get_Value();
|
||||
..\app\src\pwm.h(145): warning: #1295-D: Deprecated declaration gpio_pullup_input_inter_test - give arg types
|
||||
void gpio_pullup_input_inter_test();
|
||||
..\app\src\timeslice.c: 15 warnings, 0 errors
|
||||
compiling usr_server.c...
|
||||
..\app\src\Mode.h(43): warning: #1295-D: Deprecated declaration choice_mode - give arg types
|
||||
void choice_mode();
|
||||
..\app\src\Mode.h(44): warning: #1295-D: Deprecated declaration set_mode - give arg types
|
||||
void set_mode();
|
||||
..\app\src\Mode.h(45): warning: #1295-D: Deprecated declaration Start_PWM - give arg types
|
||||
void Start_PWM();
|
||||
..\app\src\Mode.h(46): warning: #1295-D: Deprecated declaration Stop_PWM - give arg types
|
||||
void Stop_PWM();
|
||||
..\app\src\Mode.h(47): warning: #1295-D: Deprecated declaration Set_timing - give arg types
|
||||
void Set_timing();
|
||||
..\app\src\PWM.h(137): warning: #1295-D: Deprecated declaration _PWM_INIT - give arg types
|
||||
void _PWM_INIT();
|
||||
..\app\src\PWM.h(143): warning: #1295-D: Deprecated declaration adc_Init - give arg types
|
||||
void adc_Init();
|
||||
..\app\src\PWM.h(144): warning: #1295-D: Deprecated declaration My_ADC_Get_Value - give arg types
|
||||
void My_ADC_Get_Value();
|
||||
..\app\src\PWM.h(145): warning: #1295-D: Deprecated declaration gpio_pullup_input_inter_test - give arg types
|
||||
void gpio_pullup_input_inter_test();
|
||||
..\app\src\usr_server.c(275): warning: #223-D: function "ble_callback" declared implicitly
|
||||
ble_callback(co_buf_data(p_data)[0],co_buf_data(p_data)[1],co_buf_data(p_data)[2],co_buf_data(p_data)[3]);
|
||||
..\app\src\usr_server.c: 10 warnings, 0 errors
|
||||
..\app\src\xc_drv_pwm.c: 5 warnings, 0 errors
|
||||
compiling aes.c...
|
||||
linking...
|
||||
Program Size: Code=32064 RO-data=2208 RW-data=2804 ZI-data=3856
|
||||
Program Size: Code=32216 RO-data=2208 RW-data=2804 ZI-data=3856
|
||||
FromELF: creating hex file...
|
||||
After Build - User command #1: fromelf --bin --output=app.bin .\Objects\Xinc_ble_sdk.axf
|
||||
After Build - User command #2: .\output_tool\ge_ota_scan.bat
|
||||
Size of file: 34532 bytes.
|
||||
all_size=34532
|
||||
Size of file: 34684 bytes.
|
||||
all_size=34684
|
||||
dual_xip
|
||||
Addr:13000
|
||||
Size:0x86e4
|
||||
Size:0x877c
|
||||
BAddr:0x40000
|
||||
Acheck:0x36596580
|
||||
Acheck:0xafd324c0
|
||||
SoftVer:0x10
|
||||
RomVer:0x20
|
||||
LoadAddr:0x11013000
|
||||
@@ -292,7 +81,7 @@ status2=1
|
||||
updata file success !
|
||||
已复制 1 个文件。
|
||||
已复制 1 个文件。
|
||||
".\Objects\Xinc_ble_sdk.axf" - 0 Error(s), 103 Warning(s).
|
||||
".\Objects\Xinc_ble_sdk.axf" - 0 Error(s), 5 Warning(s).
|
||||
|
||||
<h2>Software Packages used:</h2>
|
||||
|
||||
@@ -305,7 +94,7 @@ Package Vendor: ARM
|
||||
D:/Program Files/Keil_v5/ARM/Packs/ARM/CMSIS/5.9.0/Device/ARM/ARMCM0/Include
|
||||
|
||||
<h2>Collection of Component Files used:</h2>
|
||||
Build Time Elapsed: 00:00:09
|
||||
Build Time Elapsed: 00:00:04
|
||||
</pre>
|
||||
</body>
|
||||
</html>
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
File diff suppressed because one or more lines are too long
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -1,4 +1,4 @@
|
||||
;#<FEEDBACK># ARM Linker, 5060750: Last Updated: Fri Sep 04 11:52:38 2026
|
||||
;#<FEEDBACK># ARM Linker, 5060750: Last Updated: Sat Sep 05 15:40:21 2026
|
||||
;VERSION 0.2
|
||||
;FILE aes.o
|
||||
__asm___5_aes_c____REV16 <= USED 0
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Reference in New Issue
Block a user