发布PWM32EPRO V2.0版本

project/example/ble/ble_peripheral/app/api/app_task.h

@@ -397,7 +397,7 @@
 	
 	
 /// Default Device Name
-#define APP_DFLT_DEVICE_NAME     ("DWM22") //
+#define APP_DFLT_DEVICE_NAME     ("PWM32EPRO") //
 #define APP_DFLT_DEVICE_NAME_LEN (sizeof(APP_DFLT_DEVICE_NAME))
 #define APP_DFLT_DEVICE_NAME_LEN1 (sizeof(APP_DFLT_DEVICE_NAME1))
 #define APP_DFLT_DEVICE_NAME2     ("Second_test")

project/example/ble/ble_peripheral/app/src/arch_main.c

@@ -452,7 +452,6 @@ int main(void)
 #endif
 	//	gpio_pullup_input_inter_test();
 		adc_Init();
-		external_key_init();
 		/* Keep RF433 GPIO initialization after the other input setup. */
 		rf433_gpio_init();
 		/* Clear any startup transition pulses after RF433 GPIO is stable. */

project/example/ble/ble_peripheral/app/src/bridge_pwm.c

@@ -16,7 +16,7 @@
  * Dual-color output uses one fixed 500 us frame:
  *   OFF -> W pulse -> OFF -> C pulse -> OFF to frame end.
  * The available OFF time is distributed around both direction changes and
- * each W/C transition retains at least 25 us protection.
+ * each W/C transition retains at least 50 us protection.
  * Normal dual-color output produces one pulse per color per frame (2 kHz).
  * Only the low-output neutral section of three-color breathing uses PDM.
  */
@@ -24,8 +24,8 @@
 #define BRIDGE_PWM_PERIOD         6U
 #define BRIDGE_MIX_SCALE          1000U
 #define BRIDGE_FRAME_US           500U
-#define BRIDGE_DEADTIME_US        25U
-#define BRIDGE_DUAL_ACTIVE_US     450U
+#define BRIDGE_DEADTIME_US        50U
+#define BRIDGE_DUAL_ACTIVE_US     400U
 #define BRIDGE_MIN_DUAL_PULSE_US  1U
 #define BRIDGE_NEUTRAL_PDM_PULSE_US 50U
 #define BRIDGE_TIMER_TICKS_PER_US 16U
@@ -521,7 +521,7 @@ __RAM_CODE void Bridge_Service_1ms(void)
         pwm_duty = (uint16_t)((total * BRIDGE_PWM_SCALE +
                                (BRIDGE_MIX_SCALE / 2U)) / BRIDGE_MIX_SCALE);
         /*
-         * Use the same 450 us maximum energy as mixed light for every
+         * Use the same 400 us maximum energy as mixed light for every
          * single-color output. Switching between the hardware-PWM and
          * Timer3 mixed-light paths therefore does not change total energy.
          */
@@ -550,9 +550,9 @@ __RAM_CODE void Bridge_Service_1ms(void)
     if (cached_w_mix != w_mix || cached_c_mix != c_mix ||
         output_mode != BRIDGE_MODE_DUAL) {
         /*
-         * Keep 50 us OFF at maximum dual-color brightness. The OFF time is
-         * split evenly between W->C and C->W, which both absorbs interrupt
-         * latency and spreads the two optical pulses across the 500 us frame.
+         * Keep 100 us OFF at maximum dual-color brightness. The OFF time is
+         * split evenly into 50 us for W->C and 50 us for C->W. This absorbs
+         * interrupt latency and spreads both optical pulses across the frame.
          */
         total_on_us = (BRIDGE_DUAL_ACTIVE_US * total +
                        (BRIDGE_MIX_SCALE / 2U)) / BRIDGE_MIX_SCALE;

project/example/ble/ble_peripheral/app/src/timeslice.c

@@ -34,7 +34,6 @@ TASK_COMPONENTS TaskComps[] =
 			{0, 311, 1, app_op_flash},					  //用户数据持久化 fmc_spi_read9	 			
 	 	  {0, 311, 1, xc_ota_schedule},					//保存flash数据任务				8  //最后调用的
 			{0, 1, 1, rf433_decoder_process},
-			{0, 10, 10, external_key_scan},				//GPIO5 external key scan
 };
 
 /**************************************************************************************