增加上电三色轮换与记忆策略

project/example/ble/ble_peripheral/app/src/Rf433.c

@@ -7,6 +7,7 @@
 #include "light_transition.h"
 #include "pwm.h"
 #include "rf433_decoder.h"
+#include "timeslice.h"
 union rf433_flag rf_flag = {0};
 unsigned char  high_level_time;
 unsigned char  low_level_time;
@@ -453,7 +454,6 @@ void _433_fun(){
    }
    if(Key_TypeDef.KEY_STATE_Click==1||KEY_STATE_re==1) return;
 	  set_click();
-	  sss=1;//记忆标志位
 		switch(res_data){
 		//椭圆
 				case ON://单击
@@ -534,6 +534,7 @@ void _433_fun(){
 						}
 						break;
 		}				
+		set_TaskComps_timer(2U, 1000U);
 
 }
 

project/example/ble/ble_peripheral/app/src/arch_main.c

@@ -396,6 +396,7 @@ int main(void)
     xc_fmc_spi_flash_wake_up();
 	
 		fmc_spi_read();
+		power_restore_apply_on_boot();
 		timer0_2_init();
     bluetooth_init();
 

project/example/ble/ble_peripheral/app/src/fmc_spi.c

@@ -33,6 +33,7 @@
 #include "PWM.h"
 #include "RF433.h"
 #include "xc60xx.h"
+#include "timeslice.h"
 
 /*------------------------------------------------------------------------------------
 	                                    Macros
@@ -73,6 +74,15 @@ unsigned char get_checksum(unsigned char *ptrdata, unsigned char length)
 #define FLASH_BRIGHTNESS_PERCENT_MARK  0xA5U
 #define FLASH_MODE_LAYOUT_INDEX        26U
 #define FLASH_MODE_LAYOUT_MARK         0xA6U
+#define FLASH_POWER_MODE_MARK_INDEX    27U
+#define FLASH_POWER_MODE_INDEX         28U
+#define FLASH_POWER_CYCLE_INDEX        29U
+#define FLASH_POWER_MODE_MARK          0xA7U
+#define POWER_POLICY_SAVE_DELAY_MS     100U
+#define POWER_CYCLE_SAVE_DELAY_MS      100U
+
+uint8_t power_restore_policy = POWER_RESTORE_CYCLE_STATIC;
+static uint8_t power_cycle_next_mode;
 
 void read_user_data(void)
 {
@@ -141,6 +151,20 @@ void read_user_data(void)
 				}
 				if(choose_mode_falsg > CUSTOM_TEMPERATURE_MODE)
 					choose_mode_falsg = EFFECT_MODE_MIN;
+				if(r_data[FLASH_POWER_MODE_MARK_INDEX] == FLASH_POWER_MODE_MARK)
+				{
+					power_restore_policy = r_data[FLASH_POWER_MODE_INDEX];
+					if(power_restore_policy > POWER_RESTORE_CYCLE_STATIC)
+						power_restore_policy = POWER_RESTORE_CYCLE_STATIC;
+					power_cycle_next_mode = r_data[FLASH_POWER_CYCLE_INDEX];
+					if(power_cycle_next_mode > 2U)
+						power_cycle_next_mode = 0U;
+				}
+				else
+				{
+					power_restore_policy = POWER_RESTORE_CYCLE_STATIC;
+					power_cycle_next_mode = 0U;
+				}
 				//choose_mode_bh=r_data[31];
 				driveMode=r_data[32];
 				flag_1h = (r_data[36] << 24) | (r_data[35] << 16) | (r_data[34] << 8) | r_data[33];
@@ -187,9 +211,9 @@ void wright_user_data(void)
 		app_data[24]=adress_H_array[4];
 		app_data[25]=adress_L_array[4];
 		app_data[FLASH_MODE_LAYOUT_INDEX]=FLASH_MODE_LAYOUT_MARK;
-		app_data[27]=0;
-		app_data[28]=0;	
-		app_data[29]=0;
+		app_data[FLASH_POWER_MODE_MARK_INDEX]=FLASH_POWER_MODE_MARK;
+		app_data[FLASH_POWER_MODE_INDEX]=power_restore_policy;
+		app_data[FLASH_POWER_CYCLE_INDEX]=power_cycle_next_mode;
 		app_data[30]=choose_mode_falsg;
 		app_data[31]=choose_mode_bh;
 		app_data[32]=driveMode;
@@ -215,3 +239,55 @@ void fmc_spi_read(void)
 }	
 
 
+void power_restore_policy_set(uint8_t policy)
+{
+	if(policy > POWER_RESTORE_CYCLE_STATIC) return;
+
+	if(policy == POWER_RESTORE_CYCLE_STATIC &&
+	   power_restore_policy != POWER_RESTORE_CYCLE_STATIC)
+		power_cycle_next_mode = 0U;
+
+	if(policy == power_restore_policy) return;
+
+	power_restore_policy = policy;
+	set_TaskComps_timer(2U, POWER_POLICY_SAVE_DELAY_MS);
+}
+
+void power_restore_apply_on_boot(void)
+{
+	uint8_t mode_index;
+
+	if(power_restore_policy != POWER_RESTORE_CYCLE_STATIC) return;
+
+	mode_index = power_cycle_next_mode;
+	if(mode_index > 2U) mode_index = 0U;
+
+	deviceStatus = POWERON;
+	Mode = mode0;
+	choose_mode_falsg = mode_index;
+	choose_mode_bh = 0U;
+
+	if(mode_index == 0U)
+	{
+		W_PWM = 100U;
+		C_PWM = 0U;
+		driveMode = 1U;
+	}
+	else if(mode_index == 1U)
+	{
+		W_PWM = 0U;
+		C_PWM = 100U;
+		driveMode = 2U;
+	}
+	else
+	{
+		W_PWM = 50U;
+		C_PWM = 50U;
+		driveMode = 0U;
+	}
+
+	power_cycle_next_mode = (uint8_t)((mode_index + 1U) % 3U);
+
+	/* Save the next startup mode while power is stable. */
+	set_TaskComps_timer(2U, POWER_CYCLE_SAVE_DELAY_MS);
+}

project/example/ble/ble_peripheral/app/src/fmc_spi.h

@@ -37,6 +37,9 @@ extern "C" {
 #include <string.h>
 #include <stdint.h>
 
+#define POWER_RESTORE_FULL_MEMORY  0U
+#define POWER_RESTORE_CYCLE_STATIC 1U
+
 /*------------------------------------------------------------------------------------
 	                                     Macros
  -------------------------------------------------------------------------------------*/
@@ -49,12 +52,15 @@ extern "C" {
 	                                 Global Variables
  -------------------------------------------------------------------------------------*/
  extern uint8_t data[];
+ extern uint8_t power_restore_policy;
 /*------------------------------------------------------------------------------------
 	                                Exported Functions
  -------------------------------------------------------------------------------------*/
 void fmc_spi_wright(void);
 void fmc_spi_dma_demo(void);
 void fmc_spi_read(void);
+void power_restore_apply_on_boot(void);
+void power_restore_policy_set(uint8_t policy);
 #ifdef __cplusplus
 }
 #endif

project/example/ble/ble_peripheral/app/src/uart.c

@@ -37,6 +37,7 @@
 #include "timer.h"
 #include "math.h"
 #include "timeslice.h"
+#include "fmc_spi.h"
 
 /*------------------------------------------------------------------------------------
                                         Macros
@@ -83,7 +84,6 @@ void uart_receive_cb(uint8_t *buff, uint16_t len)
 void scan_uar_data(uint8_t *frame){
 	
 }
-extern uint8_t sss;
 uint8_t rx_date;
 void scan_uart(uint8_t *arr)
 {
@@ -105,8 +105,7 @@ void scan_uart(uint8_t *arr)
             checksum += user_rx_buf[i];
         }
          user_rx_buf[5] = checksum; // 校验位
-				sss=1;
-			//	printf("sss=%d\r\n",sss);
+				set_TaskComps_timer(2U, 1000U);
 				switch (user_rx_buf[4])
 						{
 							  
@@ -172,6 +171,9 @@ void scan_uart(uint8_t *arr)
 										 flag_1h=flag_1h*60000;
 								     //flag_1h=2000;
 										break;	
+								case 12:
+										power_restore_policy_set(user_rx_buf[1]);
+										break;
 								case 9:	
 
 										break;									

project/example/ble/ble_peripheral/app/src/usr_server.c

@@ -14,6 +14,7 @@
 #include "usr_server.h"
 #include "Mode.h"
 #include "PWM.h"
+#include "fmc_spi.h"
 #if (BLE_APP_PRESENT)
 
 uint8_t srv_user_lid                                = GATT_INVALID_USER_LID;
@@ -91,7 +92,8 @@ uint8_t send_flag=1;
 #define BLE_STATE_DIRTY_BRIGHTNESS  0x04U
 #define BLE_STATE_DIRTY_SPEED       0x08U
 #define BLE_STATE_DIRTY_TEMPERATURE 0x10U
-#define BLE_STATE_DIRTY_ALL         0x1FU
+#define BLE_STATE_DIRTY_POWER_MODE  0x20U
+#define BLE_STATE_DIRTY_ALL         0x3FU
 
 static uint8_t ble_state_dirty = BLE_STATE_DIRTY_ALL;
 static uint8_t ble_last_power;
@@ -99,6 +101,7 @@ static uint8_t ble_last_mode;
 static uint8_t ble_last_brightness;
 static uint8_t ble_last_speed;
 static uint8_t ble_last_temperature;
+static uint8_t ble_last_power_mode;
 
 static uint8_t ble_temperature_value(void)
 {
@@ -132,6 +135,8 @@ void ble_state_sync_poll(void)
         ble_state_dirty |= BLE_STATE_DIRTY_SPEED;
     if(Mode == mode0 && ble_temperature_value() != ble_last_temperature)
         ble_state_dirty |= BLE_STATE_DIRTY_TEMPERATURE;
+    if(power_restore_policy != ble_last_power_mode)
+        ble_state_dirty |= BLE_STATE_DIRTY_POWER_MODE;
 
     if(!send_flag || !ble_state_dirty) return;
 
@@ -159,12 +164,18 @@ void ble_state_sync_poll(void)
         data[3] = 0x05U;
         sent_mask = BLE_STATE_DIRTY_SPEED;
     }
-    else
+    else if(ble_state_dirty & BLE_STATE_DIRTY_TEMPERATURE)
     {
         value = ble_temperature_value();
         data[3] = 0x06U;
         sent_mask = BLE_STATE_DIRTY_TEMPERATURE;
     }
+    else
+    {
+        value = power_restore_policy;
+        data[3] = 0x0CU;
+        sent_mask = BLE_STATE_DIRTY_POWER_MODE;
+    }
 
     data[0] = value;
     if(slave_send_data(data, sizeof(data), CUSTOM_SVC_TX_CHAR_VAL) == GATT_NO_ERROR)
@@ -173,7 +184,8 @@ void ble_state_sync_poll(void)
         else if(sent_mask == BLE_STATE_DIRTY_MODE) ble_last_mode = value;
         else if(sent_mask == BLE_STATE_DIRTY_BRIGHTNESS) ble_last_brightness = value;
         else if(sent_mask == BLE_STATE_DIRTY_SPEED) ble_last_speed = value;
-        else ble_last_temperature = value;
+        else if(sent_mask == BLE_STATE_DIRTY_TEMPERATURE) ble_last_temperature = value;
+        else ble_last_power_mode = value;
         ble_state_dirty &= (uint8_t)(~sent_mask);
     }
 }

project/example/ble/ble_peripheral/mdk/Linker/cpu_xip.scat

@@ -1,6 +1,6 @@
-LOAD	0x1100E000	
+LOAD	0x11011000
 {
-	EXE	0x1100E000 
+	EXE	0x11011000
 	{
         startup_xinc.o (RESET, +FIRST)
 		* (+RO)
@@ -20,7 +20,8 @@ LOAD	0x1100E000
        *(ram_em)
     }
 	ScatterAssert((0x530077b0)+ImageLength(RW2) < 0x53008000)
-	ScatterAssert(ImageLength(EXE) <= 0x10000)
+	/* User settings start at flash offset 0x1E000. */
+	ScatterAssert(ImageLength(EXE) <= 0xD000)
 	
 
 }

project/example/ble/ble_peripheral/mdk/ble_peripheral.uvprojx

@@ -338,7 +338,7 @@
             <v6Rtti>0</v6Rtti>
             <VariousControls>
               <MiscControls>--gnu --diag_suppress=66 --feedback fb.txt</MiscControls>
-              <Define>APP_SCAN_FUNCTION=0 CFG_MIN_STACK CONFIG_BT_WAKEUP_VIA_GPIO=0 CONFIG_HFCLK_IS_OSC32M_PLL_32M=1 SCATTER_LOAD_RAM_EM=1 SDK_VERSION="2b8e78c6" RC_32K=1  XC60XX CFG_BLE CFG_EMB  CFG_STATIC HCI_TEST_NO_IP=0 CFG_ACT=20  CFG_CON=1 CFG_RAL=1 CFG_HOST CFG_APP CFG_APP_PRF CFG_RF_EXTRC CFG_AES_RPA CFG_PERIPHERAL USE_XIP=1 DEBUG_ENABLE  ROM_ENV_ENABLE=0  CODE_USE_XIP  CFG_PRF_BASS USE_ROM_FLASH=1  CFG_ADV_LOW_POWER  CFG_CONN_OPTIMIZE_0x3E</Define>
+              <Define>WDT_ON=1 APP_SCAN_FUNCTION=0 CFG_MIN_STACK CONFIG_BT_WAKEUP_VIA_GPIO=0 CONFIG_HFCLK_IS_OSC32M_PLL_32M=1 SCATTER_LOAD_RAM_EM=1 SDK_VERSION="2b8e78c6" RC_32K=1  XC60XX CFG_BLE CFG_EMB  CFG_STATIC HCI_TEST_NO_IP=0 CFG_ACT=20  CFG_CON=1 CFG_RAL=1 CFG_HOST CFG_APP CFG_APP_PRF CFG_RF_EXTRC CFG_AES_RPA CFG_PERIPHERAL USE_XIP=1 DEBUG_ENABLE  ROM_ENV_ENABLE=0  CODE_USE_XIP  CFG_PRF_BASS USE_ROM_FLASH=1  CFG_ADV_LOW_POWER  CFG_CONN_OPTIMIZE_0x3E</Define>
               <Undefine></Undefine>
               <IncludePath>..\..\..\..\..\component\ble\Include;..\app\api;..\..\..\..\..\component\ble\modules\aes\api;..\..\..\..\..\component\ble\modules\aes\src;..\..\..\..\..\component\ble\modules\common\api;..\..\..\..\..\component\ble\modules\common\src;..\..\..\..\..\component\ble\modules\ecc_p256\api;..\..\..\..\..\component\ble\modules\ecc_p256\src;..\..\..\..\..\component\ble\modules\h4tl\api;..\..\..\..\..\component\ble\modules\h4tl\src;..\..\..\..\..\component\ble\modules\ke\api;..\..\..\..\..\component\ble\modules\ke\src;..\..\..\..\..\component\ble\modules\nvds\api;..\..\..\..\..\component\ble\modules\nvds\src;..\..\..\..\..\component\ble\modules\rf\api;..\..\..\..\..\component\ble\modules\rf\src;..\..\..\..\..\component\ble\modules\rwip\api;..\..\..\..\..\component\ble\modules\rwip\src;..\..\..\..\..\component\ble\ip\ahi\api;..\..\..\..\..\component\ble\ip\ahi\src;..\..\..\..\..\component\ble\ip\ble\gaf\api;..\..\..\..\..\component\ble\ip\ble\gaf\inc;..\..\..\..\..\component\ble\ip\ble\gaf\src;..\..\..\..\..\component\ble\ip\ble\gaf\src\acc;..\..\..\..\..\component\ble\ip\ble\gaf\src\al;..\..\..\..\..\component\ble\ip\ble\gaf\src\arc;..\..\..\..\..\component\ble\ip\ble\gaf\src\bap\bc;..\..\..\..\..\component\ble\ip\ble\gaf\src\bap\capa;..\..\..\..\..\component\ble\ip\ble\gaf\src\bap\codec;..\..\..\..\..\component\ble\ip\ble\gaf\src\bap\uc;..\..\..\..\..\component\ble\ip\ble\gaf\src\iap;..\..\..\..\..\component\ble\ip\ble\hl\api;..\..\..\..\..\component\ble\ip\ble\hl\inc;..\..\..\..\..\component\ble\ip\ble\hl\src;..\..\..\..\..\component\ble\ip\ble\hl\src\gap;..\..\..\..\..\component\ble\ip\ble\hl\src\gap\gapc;..\..\..\..\..\component\ble\ip\ble\hl\src\gap\gapm;..\..\..\..\..\component\ble\ip\ble\hl\src\gatt;..\..\..\..\..\component\ble\ip\ble\hl\src\inc;..\..\..\..\..\component\ble\ip\ble\hl\src\l2cap;..\..\..\..\..\component\ble\ip\ble\ll\api;..\..\..\..\..\component\ble\ip\ble\ll\src;..\..\..\..\..\component\ble\ip\ble\ll\src\co;..\..\..\..\..\component\ble\ip\ble\ll\src\llc;..\..\..\..\..\component\ble\ip\ble\ll\src\lld;..\..\..\..\..\component\ble\ip\ble\ll\src\lli;..\..\..\..\..\component\ble\ip\ble\ll\src\llm;..\..\..\..\..\component\ble\ip\ble\profiles\bas\bass\api;..\..\..\..\..\component\ble\ip\ble\profiles\bas\bass\src;..\..\..\..\..\component\ble\ip\em\api;..\..\..\..\..\component\ble\ip\em\src;..\..\..\..\..\component\ble\ip\hci\api;..\..\..\..\..\component\ble\ip\hci\src;..\..\..\..\..\component\ble\ip\sch\api;..\..\..\..\..\component\ble\ip\sch\src;..\..\..\..\..\component\ble\plf\refip\src\build\ble-full\reg\fw;..\app\api;..\app\src;..\..\..\..\..\component\ble\plf\refip\src\arch;..\..\..\..\..\component\ble\plf\refip\src\arch\compiler\gnuarm;..\..\..\..\..\component\ble\plf\refip\src\arch\ll\gnuarm;..\..\..\..\..\component\ble\plf\refip\src\driver\reg;..\..\..\..\..\component\ble\plf\refip\src\arch\boot\rvds;..\..\..\..\..\component\ble\plf\refip\src\driver\syscntl;..\..\..\..\..\component\ble\plf\refip\src\driver\emi;..\..\..\..\..\component\ble\plf\refip\src\driver\intc;..\..\..\..\..\component\ble\plf\refip\src\driver\uart;..\..\..\..\..\component\ble\plf\refip\src\driver\flash;..\..\..\..\..\component\ble\plf\refip\src\driver\led;..\..\..\..\..\component\ble\modules\dbg\api;..\..\..\..\..\component\ble\plf\refip\src\driver\uart;..\..\..\..\..\component\xc6xx_drivers\Drivers\CMSIS;..\..\..\..\..\component\xc6xx_drivers\Drivers\CMSIS\Device;..\..\..\..\..\component\xc6xx_drivers\Drivers\Startup;..\..\..\..\..\component\xc6xx_drivers\Drivers\Startup\xc60xx;..\..\..\..\..\component\xc6xx_drivers\Drivers\Periph_HAL_Driver;..\..\..\..\..\component\xc6xx_drivers\Drivers\Periph_HAL_Driver\Bitfields;..\..\..\..\..\component\xc6xx_drivers\Drivers\Periph_HAL_Driver\Ringbuffer;..\..\..\..\..\component\xc6xx_drivers\Drivers\test_case\PWR;..\..\..\..\..\component\xc6xx_drivers\Drivers\test_case\TIMER;..\..\..\..\..\component\ble\ip\ble\api;..\..\..\..\..\component\ble\ip\ble\ll_rom_port;..\..\..\..\..\component\xc6xx_drivers\Drivers\xc_driver;..\..\..\..\..\component\xc6xx_drivers\Drivers\CMSIS\Device\xc_m0_register;..\..\..\..\..\component\ble\modules\flash;..\..\..\..\..\component\xc6xx_drivers\Drivers\xc_driver;..\..\..\driver\adc_mic_pga\app\api;..\app\src\project_config;..\app\src\elk_leds</IncludePath>
             </VariousControls>

project/example/ble/ble_peripheral/mdk/output_tool/xinchip_bootloader2.bat

@@ -1,6 +1,6 @@
 .\output_tool\xinchip_bootloader2_tool.exe  .\output_tool\boot2  ^
 .\output_tool\host  0x11002000  0 ^
-app.bin     0x1100E000  1  ^
+app.bin     0x11011000  1  ^
 .\output_bin\ble_peripheral.bin 1
 
 copy .\output_bin\ble_peripheral.bin .\