#ifndef _RF433_H_
#define _RF433_H_

#include <stdio.h>
#include <string.h>
#include <stdint.h>

///*
//   09   07  01  03
//	  
//	 
//	 
//   0B  05  0A  0C 
//*/


//#define  ON_OFF   				 0X03  //开关

//#define  Mode_choose      0X01  //七彩

//#define  Brightness_L          0X09  //

//#define  Brightness_H          0X07  

//#define  Time_1h               0x0B  

//#define  Time_2h               0x05  

//#define  Speed_add             0x0C  

//#define  Speed_dow             0x0A  


//#define  ON  				       0XF1 //开关

//#define  OFF      				 0XF0  //七彩

//#define  Mode_add          0XF2  //

//#define  Mode_dow          0XF3  

//#define  Brightness_H               0xF4  

//#define  Brightness_L               0xF5  

//椭圆
#define  ON  				       0X02 //开关

#define  OFF      				 0X04  //七彩

#define  Mode_add          0X06  //

#define  Mode_dow          0X0E  

#define  Brightness_H      0x08  

#define  Brightness_L      0x0D

#define  Speed_H           0x08  

#define  Speed_L           0x0D  



//扁形
#define  B_Brightness_H      0x00  

#define  B_Brightness_L      0x0F

#define  B_Speed_L      0x0A    //F_Speed_dow  0x0A

#define  B_Speed_H      0x0C //  F_Speed_add             0x0C  


//方形
#define  F_ON_OFF   				     0X03  //开关

#define  F_Mode_choose           0X01  //七彩

#define  F_Brightness_100        0X07  //

#define  F_Brightness_10         0X09  

#define  F_Time_1h               0x0B  

#define  F_Time_2h               0x05  

#define  F_Speed_add             0x0C  

#define  F_Speed_dow             0x0A  



//#define  RF_DATA        P15		//RF433接收引脚,根据具体单片机定义引脚

//#define  RF433_PIN      GPIO_5		//RF433接收引脚,根据具体单片机定义引脚

//#define  RF_DATA        P15//RF433接收引脚,根据具体单片机定义引脚


#define  RF_DATA        xc_gpio_read_pin(RF433_PIN)		//RF433接收引脚,根据具体单片机定义引脚

#define  RF433_PIN      GPIO_5		//RF433接收引脚,根据具体单片机定义引脚
#define  RF_dd          GPIO_0		//


#define frames_time        70     //该值要大于68,68指代通过逻辑分析仪抓取一帧的时间   
#define LongPress_time     100     //长按时间  100ms触发一次
#define Short_time         60      //  时间  60ms触发一次 
//enum
//{
//    SHUT_DOWN,
//    POWER_ON
//};

enum
{
    LOW_LEVEL,  //0
    HIGH_LEVEL  //1
};

enum
{
	FAIL,
	SUCCESS
};

enum
{
    NOMATCH,
    MATCHED
};

struct receive_data_page//接收数据包结构
{
    unsigned char idh;
    unsigned char idl;
    unsigned char key_value;
};
struct address
{
    unsigned char address_l;
    unsigned char address_h;
};
union rf433_flag
{
    struct
    {
        unsigned char study: 1;         //表示占用1位
        unsigned char long_press_flag:1;
				unsigned char short_press_flag:1;
        unsigned char current_level: 1;
        unsigned char sync_code: 1;
        unsigned char decode_success_flag:1;     //松手检测标志
        unsigned char new_remote_flag:1;
        unsigned char receive_finish: 1;
				unsigned char raised_long_press_flag: 1;
    } rf_receive_flag;
    unsigned char flag;
}; //联合体赋初值 rf_flag = {0}


				
extern union rf433_flag rf_flag;				
extern struct receive_data_page Receive_data_page;				
extern struct address Remote_adress;	
extern uint8_t match_success;
extern unsigned char match_time_over_flag;
extern uint32_t receive_data;
extern uint32_t  flag_1h;
extern uint8_t   is_time;
extern uint32_t  adress;
extern unsigned char  receive_data_cnt;

extern uint8_t res_data;


extern uint8_t adress_H;
extern uint8_t adress_L;
extern uint8_t adress_H_array[5];
extern uint8_t adress_L_array[5];
extern uint8_t long_flag_s;


void rf433_receive();
void rf433_gpio_init();
void scan_433();
void Lock_Pwm7xd();
void Delay_50us();
void Encoder_key();


#endif