MARVEL/pwm32e_pro
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
9e64addaec07f291973256aa785b434cfab77374
pwm32e_pro/component/ble/modules/rwip/api/rwip_config.h
T
moyuhai 41a602f89c V1.0
2026-06-09 16:39:17 +08:00

1644 lines
58 KiB
C
Raw Blame History

/**
****************************************************************************************
*
* @file rwip_config.h
*
* @brief Configuration of the RW IP SW
*
* Copyright (C) RivieraWaves 2009-2015
*
*
****************************************************************************************
*/
#ifndef RWIP_CONFIG_H_
#define RWIP_CONFIG_H_
#include <string.h>
/**
****************************************************************************************
* @addtogroup ROOT
* @{
*
* Information about RW SW IP options and flags
*
* BT_DUAL_MODE BT/BLE Dual Mode
* BT_STD_MODE BT Only
* BLE_STD_MODE BLE Only
*
* BT_EMB_PRESENT BT controller exists
* BLE_EMB_PRESENT BLE controller exists
* BLE_HOST_PRESENT BLE host exists
*
* @name RW Stack Configuration
* @{
****************************************************************************************
*/
/*
* DEFINES
****************************************************************************************
*/
/******************************************************************************************/
/* ------------------------- PATCH PARTITIONING -----------------------------------*/
/******************************************************************************************/
#if defined(CFG_CONFIG_XMBOX_RC)
#define CONFIG_XMBOX_RC 1
#else
#define CONFIG_XMBOX_RC 0
#endif
#if defined(CFG_CONFIG_AES)
#define RWIP_AES_ENCRYPT 1
#else
#define RWIP_AES_ENCRYPT 0
#endif
/******************************************************************************************/
/* ------------------------- STACK PARTITIONING -----------------------------------*/
/******************************************************************************************/
#if defined(CFG_PHY_UP)
#define BLE_PHY_UP_PRESENT 1
#else // defined(CFG_PHY_UP)
#define BLE_PHY_UP_PRESENT 0
#endif // defined(CFG_BT)
#if defined(CFG_PER_ADV)
#define BLE_PER_ADV_PRESENT 1
#else // defined(CFG_PER_ADV)
#define BLE_PER_ADV_PRESENT 0
#endif // defined(CFG_PER_ADV)
#if defined(CFG_AUX_ADV)
#define BLE_AUX_ADV_PRESENT 1
#else // defined(CFG_AUX_ADV)
#define BLE_AUX_ADV_PRESENT 0
#endif // defined(CFG_AUX_ADV)
#if defined(CFG_CLK_ACC)
#define BLE_CLK_ACC_PRESENT 1
#else // defined(CFG_CLK_ACC)
#define BLE_CLK_ACC_PRESENT 0
#endif // defined(CFG_CLK_ACC)
#if defined(CFG_NO_USE_HCI_FEAT)
#define BLE_NO_USE_HCI_FEAT_PRESENT 0
#else // defined(CFG_NO_USE_HCI_FEAT)
#define BLE_NO_USE_HCI_FEAT_PRESENT 0
#endif // defined(CFG_NO_USE_HCI_FEAT)
#if defined(CFG_BLE_HOST_SUPPORT_SMP)
#define BLE_HOST_SUPPORT_SMP 0
#else // defined(CFG_BLE_HOST_SUPPORT_SMP)
#define BLE_HOST_SUPPORT_SMP 1
#endif // defined(CFG_BLE_HOST_SUPPORT_SMP)
#if defined(APP_SEC_CON) && (BLE_HOST_SUPPORT_SMP)
//rom project: BLE_DH_KEY_PRESENT = 1
#define BLE_SEC_CON 1
#else // defined(CFG_DH_KEY)
#define BLE_SEC_CON 0
#endif // defined(CFG_DH_KEY)
#if defined(CFG_AES_RPA)
#define BLE_AES_RPA_PRESENT 0
#else // defined(CFG_AES_RPA)
#define BLE_AES_RPA_PRESENT 0
#endif // defined(CFG_AES_RPA)
#if defined(CFG_DL_UPD)
#define BLE_DL_UPD_PRESENT 0
#else // defined(CFG_DL_UPD)
#define BLE_DL_UPD_PRESENT 0
#endif // defined(CFG_DL_UPD)
#if defined(CFG_LLC_PAST)
#define BLE_LLC_PAST_PRESENT 1
#else // defined(CFG_LLC_PAST)
#define BLE_LLC_PAST_PRESENT 0
#endif // defined(CFG_LLC_PAST)
#if defined(CFG_LLC_PING)
#define BLE_LLC_PING_PRESENT 1
#else // defined(CFG_LLC_PING)
#define BLE_LLC_PING_PRESENT 0
#endif // defined(CFG_LLC_PING)
#if defined(CFG_PER_ADV_SYNC)
#define BLE_PER_ADV_SYNC_PRESENT 1
#else // defined(CFG_PER_ADV_SYNC)
#define BLE_PER_ADV_SYNC_PRESENT 0
#endif // defined(CFG_PER_ADV_SYNC)
#if defined(CFG_PER_ADV_LIST)
#define BLE_PER_ADV_LIST_PRESENT 1
#else // defined(CFG_PER_ADV_LIST)
#define BLE_PER_ADV_LIST_PRESENT 0
#endif // defined(CFG_PER_ADV_LIST)
#if defined(CFG_EATT)
#define BLE_EATT 0
#else // defined(CFG_EATT)
#define BLE_EATT 0
#endif // defined(CFG_EATT)
#if defined(CFG_LECB)
#define BLE_LECB 0
#else // defined(CFG_LECB)
#define BLE_LECB 0
#endif // defined(CFG_LECB)
#if defined(CFG_HL_L2CAP_MSG_API)
#define BLE_HL_L2CAP_MSG_API 0
#else // defined(CFG_HL_L2CAP_MSG_API)
#define BLE_HL_L2CAP_MSG_API 0
#endif // defined(CFG_HL_L2CAP_MSG_API)
#if defined(CFG_SCAN_EXT)
#define BLE_SCAN_EXT 1
#else // defined(CFG_SCAN_EXT)
#define BLE_SCAN_EXT 0
#endif // defined(CFG_SCAN_EXT)
#if defined(CFG_SCH_PLAN)
#define BLE_SCH_PLAN 1
#else // defined(CFG_SCH_PLAN)
#define BLE_SCH_PLAN 1
#endif // defined(CFG_SCH_PLAN)
#if defined(CFG_SCH_SLICE)
#define BLE_SCH_SLICE 1
#else // defined(CFG_SCH_SLICE)
#define BLE_SCH_SLICE 1
#endif // defined(CFG_SCH_SLICE)
// #if defined(CFG_ADV_LOW_POWER)
// #define ADV_LOW_POWER 1
// #else // defined(CFG_ADV_LOW_POWER)
// #define ADV_LOW_POWER 0
// #endif // defined(CFG_ADV_LOW_POWER)
#define ADV_LOW_POWER 0
#if defined(CFG_SCAN_PERFORMANCE)
#define SCAN_PERFORMANCE 1
#else // defined(CFG_SCAN_PERFORMANCE)
#define SCAN_PERFORMANCE 0
#endif // defined(CFG_SCAN_PERFORMANCE)
#if defined(CFG_CONN_OPTIMIZE_0x3E)
#define CONN_OPTIMIZE_0x3E 1
#else // defined(CFG_CONN_OPTIMIZE_0x3E)
#define CONN_OPTIMIZE_0x3E 0
#endif // defined(CFG_CONN_OPTIMIZE_0x3E)
#if defined(CFG_MTU_SIZE)
#define USER_PREF_MTU (CFG_MTU_SIZE)
#else // defined(CFG_MTU_SIZE)
#define USER_PREF_MTU (512)
#endif // defined(CFG_MTU_SIZE)
#if defined(CFG_MIN_STACK)
#define MIN_STACK 0
#define OPEN_GAP_SERVER 1
#else // defined(CFG_MIN_STACK)
#define MIN_STACK 1
#define OPEN_GAP_SERVER 1
#endif // defined(CFG_MIN_STACK)
#define CONN_EVENT_NOT_RUN_XIP 0
// CFG_RSSI_ENABLE ��enable auto agc��
// connect mode��rf_rssi_convert get value,open debug rssi
// scan mode��app task report GAPM_EXT_ADV_REPORT_IND open debug rssi addr
#if defined(CFG_RSSI_ENABLE)
#define CONN_RSSI_DEBUG 1
#define SCAN_RSSI_DEBUG 1
#else
#define CONN_RSSI_DEBUG 0
#define SCAN_RSSI_DEBUG 0
#endif // defined(CFG_RSSI_ENABLE)
#if defined(CFG_BT)
#define BT_EMB_PRESENT 1
#else // defined(CFG_BT)
#define BT_EMB_PRESENT 0
#endif // defined(CFG_BT)
#if defined(CFG_BLE) && defined(CFG_EMB)
#define BLE_EMB_PRESENT 1
#else // defined(CFG_BLE) && defined(CFG_EMB)
#define BLE_EMB_PRESENT 0
#endif // defined(CFG_BLE) && defined(CFG_EMB)
#if defined(CFG_BLE) && defined(CFG_HOST)
#define BLE_HOST_PRESENT 1
#else // defined(CFG_BLE) && defined(CFG_HOST)
#define BLE_HOST_PRESENT 0
#endif // defined(CFG_BLE) && defined(CFG_HOST)
#if defined(CFG_BLE) && defined(CFG_APP)
#define BLE_APP_PRESENT 1
#else // defined(CFG_BLE) && defined(CFG_APP)
#define BLE_APP_PRESENT 0
#endif // defined(CFG_BLE) && defined(CFG_APP)
#define BT_DUAL_MODE (BT_EMB_PRESENT && BLE_EMB_PRESENT)
#define HCI_PRESENT 1
/// Flag indicating that Mesh is supported
#if defined(CFG_BLE_MESH)
#define BLE_MESH 1
#else // !defined(CFG_BLE_MESH)
#define BLE_MESH 0
#endif // defined(CFG_BLE_MESH)
/// Flag indicating that Generic Audio Framework is supported
#if defined(CFG_BLE_GAF)
#define BLE_GAF_PRESENT 1
#else //defined(CFG_BLE_GAF)
#define BLE_GAF_PRESENT 0
#endif //defined(CFG_BLE_GAF)
/******************************************************************************************/
/* ------------------------- INTERFACES DEFINITIONS -------------------------------*/
/******************************************************************************************/
/// Application Host Interface
#if defined(CFG_AHITL)
#define AHI_TL_SUPPORT 1
#else // defined(CFG_AHITL)
#define AHI_TL_SUPPORT 0
#endif // defined(CFG_AHITL)
/// Host Controller Interface Support (defines if HCI parser is present or not)
#if defined(CFG_HCITL)
#define HCI_TL_SUPPORT 1
#else //defined(CFG_HCITL)
#define HCI_TL_SUPPORT 0
#endif //defined(CFG_HCITL)
#if BLE_HOST_PRESENT
#define H4TL_SUPPORT ((AHI_TL_SUPPORT) + (HCI_TL_SUPPORT))
#else // !BLE_HOST_PRESENT
#define H4TL_SUPPORT (HCI_TL_SUPPORT)
#endif // BLE_HOST_PRESENT
/// Number of HCI commands the stack can handle simultaneously
#define HCI_NB_CMD_PKTS (5 * HCI_TL_SUPPORT)
/******************************************************************************************/
/* -------------------------- BLE COMMON DEFINITIONS ------------------------------*/
/******************************************************************************************/
/// Kernel Heap memory sized reserved for allocate dynamically connection environment
#define KE_HEAP_MEM_RESERVED (4)
#if defined(CFG_BLE)
/// Broadcaster
#if (defined(CFG_BROADCASTER) || defined(CFG_PERIPHERAL) || defined(CFG_ALLROLES))
#define BLE_BROADCASTER 1
#else
#define BLE_BROADCASTER 0
#endif // (defined(CFG_BROADCASTER) || defined(CFG_PERIPHERAL) || defined(CFG_ALLROLES))
/// Observer
#if (defined(CFG_OBSERVER) || defined(CFG_CENTRAL) || defined(CFG_ALLROLES))
#define BLE_OBSERVER 1
#else
#define BLE_OBSERVER 0
#endif // (defined(CFG_OBSERVER) || defined(CFG_CENTRAL) || defined(CFG_ALLROLES))
/// Central
#if (defined(CFG_CENTRAL) || defined(CFG_ALLROLES))
#define BLE_CENTRAL 1
#else
#define BLE_CENTRAL 0
#endif // (defined(CFG_CENTRAL) || defined(CFG_ALLROLES))
/// Peripheral
#if (defined(CFG_PERIPHERAL) || defined(CFG_ALLROLES))
#define BLE_PERIPHERAL 1
#else
#define BLE_PERIPHERAL 0
#endif // (defined(CFG_PERIPHERAL) || defined(CFG_ALLROLES))
#if ((BLE_BROADCASTER+BLE_OBSERVER+BLE_PERIPHERAL+BLE_CENTRAL) == 0)
#error "No application role defined"
#endif // ((BLE_BROADCASTER+BLE_OBSERVER+BLE_PERIPHERAL+BLE_CENTRAL) == 0)
/// Maximum number of devices in RAL
// #define BLE_RAL_MAX (CFG_RAL)
#define BLE_RAL_MAX (2)
/// Maximum number of simultaneous BLE activities (scan, connection, advertising, initiating)
// #define BLE_ACTIVITY_MAX (CFG_ACT)
#define BLE_ACTIVITY_MAX (20)
#if (BLE_HOST_PRESENT)
/// Maximum number of simultaneous connections
#if (BLE_CENTRAL || BLE_PERIPHERAL)
#define BLE_CONNECTION_MAX (CFG_CON)
#else
#define BLE_CONNECTION_MAX (0)
#endif /* #if (BLE_CENTRAL || BLE_PERIPHERAL) */
#if (BLE_CONNECTION_MAX >= BLE_ACTIVITY_MAX)
#error "Number of connections must be strictly less than number of activities"
#endif // (BLE_CONNECTION_MAX >= BLE_ACTIVITY_MAX)
#endif // (BLE_HOST_PRESENT)
/// Max advertising reports before sending the info to the host
#define BLE_ADV_REPORTS_MAX (1)
#if (BLE_EMB_PRESENT)
/// Maximum number of ADV reports in the HCI queue to Host
#define BLE_MAX_NB_ADV_REP_FRAG (4 * HCI_TL_SUPPORT)
/// Maximum number of IQ reports in the HCI queue to Host
#define BLE_MAX_NB_IQ_REP (4 * HCI_TL_SUPPORT)
#endif // (BLE_EMB_PRESENT)
#endif //defined(CFG_BLE)
/******************************************************************************************/
/* -------------------------- LE Power Control -------------------------*/
/******************************************************************************************/
#if defined(CFG_LE_PWR_CTRL)
#define BLE_PWR_CTRL (1)
#else // !defined(CFG_LE_PWR_CTRL)
#define BLE_PWR_CTRL (0)
#endif // defined(CFG_LE_PWR_CTRL)
/******************************************************************************************/
/* -------------------------- Direction finding (AoA/AoD) -------------------------*/
/******************************************************************************************/
#if defined(CFG_CON_CTE_REQ)
#define BLE_CON_CTE_REQ (1)
#else // defined(CFG_CON_CTE_REQ)
#define BLE_CON_CTE_REQ (0)
#endif // defined(CFG_CON_CTE_REQ)
#if defined(CFG_CON_CTE_RSP)
#define BLE_CON_CTE_RSP (1)
#else // defined(CFG_CON_CTE_RSP)
#define BLE_CON_CTE_RSP (0)
#endif // defined(CFG_CON_CTE_RSP)
#if defined(CFG_CONLESS_CTE_TX)
#define BLE_CONLESS_CTE_TX (1)
#else // defined(CFG_CONLESS_CTE_TX)
#define BLE_CONLESS_CTE_TX (0)
#endif // defined(CFG_CONLESS_CTE_TX)
#if defined(CFG_CONLESS_CTE_RX)
#define BLE_CONLESS_CTE_RX (1)
#else // defined(CFG_CONLESS_CTE_RX)
#define BLE_CONLESS_CTE_RX (0)
#endif // defined(CFG_CONLESS_CTE_RX)
#if defined(CFG_AOD)
#define BLE_AOD (1)
#else // defined(CFG_AOD)
#define BLE_AOD (0)
#endif // defined(CFG_AOD)
#if defined(CFG_AOA)
#define BLE_AOA (1)
#else // defined(CFG_AOA)
#define BLE_AOA (0)
#endif // defined(CFG_AOA)
/******************************************************************************************/
/* -------------------------- ISOCHRONOUS CONFIGURATION -------------------------*/
/******************************************************************************************/
// check if isochronous is enabled or not
#if (defined(CFG_ISO_CON) && (CFG_ISO_CON > 0) && (defined(CFG_ISO_MODE_0) || defined(CFG_CIS) || defined(CFG_BIS)))
#define BLE_ISO_PRESENT (1)
#else // !(defined(CFG_ISO_CON) && (CFG_ISO_CON > 0))
#define BLE_ISO_PRESENT (0)
#endif // (defined(CFG_ISO_CON) && (CFG_ISO_CON > 0))
// *** Definition of supported isochronous mode ***
// Isochronous Mode 0 - Proprietary mode
#if (BLE_ISO_PRESENT && defined(CFG_ISO_MODE_0))
#define BLE_ISO_MODE_0 (BLE_CENTRAL | BLE_PERIPHERAL)
#define BLE_ISO_MODE_0_PROFILE (BLE_ISO_MODE_0 & BLE_HOST_PRESENT)
#if defined(CFG_ISO_MODE_0_RSA)
#define BLE_ISO_MODE_0_RSA (BLE_ISO_MODE_0_PROFILE)
#else
#define BLE_ISO_MODE_0_RSA (0)
#endif // defined(CFG_ISO_MODE_0_RSA)
#if defined(CFG_ISO_MODE_0_DEVICE)
#define BLE_ISO_MODE_0_DEVICE (BLE_ISO_MODE_0_PROFILE)
#else
#define BLE_ISO_MODE_0_DEVICE (0)
#endif // defined(CFG_ISO_MODE_0_RSA)
#else
#define BLE_ISO_MODE_0 (0)
#define BLE_ISO_MODE_0_PROFILE (0)
#define BLE_ISO_MODE_0_RSA (0)
#define BLE_ISO_MODE_0_DEVICE (0)
#endif // (BLE_ISO_PRESENT && defined(CFG_AUDIO))
// Connected Isochronous Stream
#if (BLE_ISO_PRESENT && defined(CFG_CIS))
#define BLE_CIS (BLE_CENTRAL | BLE_PERIPHERAL)
#else
#define BLE_CIS (0)
#endif // (BLE_ISO_PRESENT && defined(CFG_CIS))
// Broadcast Isochronous Stream
#if (BLE_ISO_PRESENT && defined(CFG_BIS))
#define BLE_BIS (BLE_BROADCASTER | BLE_OBSERVER)
#else
#define BLE_BIS (0)
#endif // (BLE_ISO_PRESENT && defined(CFG_BIS))
// sanity check for ISO presence
#if !(BLE_ISO_MODE_0 | BLE_BIS | BLE_CIS)
#undef BLE_ISO_PRESENT
#define BLE_ISO_PRESENT (0)
#endif // !(BLE_ISO_MODE_0 | BLE_BIS | BLE_CIS)
#if (BLE_ISO_PRESENT)
/// Maximum number of ISO channel / streams
#define BLE_ISO_CHANNEL_MAX (CFG_ISO_CON)
#define BLE_ISO_GROUP_MAX (CFG_ISO_CON)
/// Maximum number of octets that can be received/transmitted over Isochronous channels
#define BLE_MAX_ISO_OCTETS (251) // number of octets
/// Define number of ISO TX/RX buffers per isochronous channel
#define BLE_NB_ISO_BUFF_PER_CHAN (10)
/// Define number of ISO descriptors per isochronous channel
/// Must be equal to max(BLE_NB_ISODESC_PER_BIS_CHAN, BLE_NB_RX_ISODESC_PER_CIS_CHAN + BLE_NB_TX_ISODESC_PER_CIS_CHAN)
#define BLE_NB_ISODESC_PER_CHAN (4)
/// Number of ISO Descriptors - one descriptor required for update sub-event: 1 per stream
#define BLE_ISO_DESC_NB ((BLE_ISO_CHANNEL_MAX * (BLE_NB_ISODESC_PER_CHAN)) + BLE_ISO_GROUP_MAX)
/// Number of ISO buffers
#define BLE_ISO_BUF_NB (BLE_ISO_CHANNEL_MAX * BLE_NB_ISO_BUFF_PER_CHAN)
#if (BLE_CIS)
/// Define number of ISO TX/RX descriptors and buffers per CIS channel
#define BLE_NB_RXTX_ISO_DESC_BUF_PER_CIS_CHAN (2)
#endif // (BLE_CIS)
#if (BLE_BIS)
/// Define number of ISO RX or TX descriptors per BIS channel
#define BLE_NB_ISODESC_PER_BIS_CHAN (4)
#endif // (BLE_BIS)
#if (BLE_CIS | BLE_BIS)
/// Number of hopping sequence per channel
#define BLE_ISO_HOP_SEQ_PER_CHAN (2)
#define BLE_ISO_HOP_SEQ_SIZE (0x20) // Depends on max number of sub-event supported
/// Number of RX ISO buffers (add one more buffer for fake reception/transmit)
#define BLE_ISO_HOP_SEQ_NB (BLE_ISO_CHANNEL_MAX * BLE_ISO_HOP_SEQ_PER_CHAN)
#endif // (BLE_CIS | BLE_BIS)
#endif // (BLE_ISO_PRESENT)
/// Check status of Isochronous Data path drivers
/// Proprietary ISO over HCI
#if defined(CFG_ISOOHCI)
#define BLE_ISOOHCI (BLE_ISO_PRESENT)
#else
#define BLE_ISOOHCI (0)
#endif
/// Internal ISO generator for validation purpose
#if defined(CFG_ISOGEN)
#define BLE_ISOGEN (BLE_ISO_PRESENT)
#else
#define BLE_ISOGEN (0)
#endif
/// Platform PCM
#if defined(CFG_PCM)
#define BLE_ISO_PCM (BLE_ISO_PRESENT)
#else // !defined(CFG_PCM)
#define BLE_ISO_PCM (0)
#endif // defined(CFG_PCM)
/******************************************************************************************/
/* -------------------------- BUFFER SETUP --------------------------------------*/
/******************************************************************************************/
/// Buffer management - used only by host for the moment
#if (BLE_HOST_PRESENT)
#define CO_BUF_PRESENT 1
/// Size and number of big buffers available by default
#define CO_BUF_BIG_SIZE (GAP_LE_MTU_MAX)
#define CO_BUF_BIG_NB (2)
#define CO_BUF_BIG_POOL_SIZE ((CO_ALIGN4_HI(sizeof(co_buf_t) + CO_BUF_BIG_SIZE)) * CO_BUF_BIG_NB)
/// Size and number of small buffers available by default
#define CO_BUF_SMALL_SIZE (128)
#if(BLE_EMB_PRESENT)
#define CO_BUF_SMALL_NB (BLE_ACL_BUF_NB_TX)
#else // !(BLE_EMB_PRESENT)
#define CO_BUF_SMALL_NB (12)
#endif //(BLE_EMB_PRESENT)
#define CO_BUF_SMALL_POOL_SIZE ((CO_ALIGN4_HI(sizeof(co_buf_t) + CO_BUF_SMALL_SIZE)) * CO_BUF_SMALL_NB)
#else
#define CO_BUF_PRESENT 0
#endif //BLE_HOST_PRESENT
/******************************************************************************************/
/* -------------------------- DISPLAY SETUP -------------------------------------*/
/******************************************************************************************/
/// Display controller enable/disable
#if defined(CFG_DISPLAY)
#define DISPLAY_SUPPORT 1
#else
#define DISPLAY_SUPPORT 0
#endif //CFG_DISPLAY
/******************************************************************************************/
/* -------------------------- GPIO SETUP -------------------------------------*/
/******************************************************************************************/
/// Display controller enable/disable
#if defined(CFG_GPIO)
#define GPIO_SUPPORT 1
#else
#define GPIO_SUPPORT 0
#endif //CFG_GPIO
/******************************************************************************************/
/* -------------------------- RTC SETUP -------------------------------------*/
/******************************************************************************************/
/// RTC enable/disable
#if defined(CFG_RTC)
#define RTC_SUPPORT 1
#else
#define RTC_SUPPORT 0
#endif //CFG_RTC
/******************************************************************************************/
/* -------------------------- PS2 SETUP -------------------------------------*/
/******************************************************************************************/
/// PS2 enable/disable
#if defined(CFG_PS2)
#define PS2_SUPPORT 1
#else
#define PS2_SUPPORT 0
#endif //CFG_PS2
/******************************************************************************************/
/* -------------------------- AUDIO SYNC SETUP ----------------------------------*/
/******************************************************************************************/
/// Audio Sync enable/disable
#if defined(CFG_AUDIO_SYNC)
#define AUDIO_SYNC_SUPPORT 1
#else
#define AUDIO_SYNC_SUPPORT 0
#endif //CFG_AUDIO_SYNC
/******************************************************************************************/
/* -------------------------- GAIA SETUP -------------------------------------*/
/******************************************************************************************/
/// GAIA enable/disable
#if defined(CFG_GAIA)
#define GAIA_SUPPORT 1
#else
#define GAIA_SUPPORT 0
#endif //CFG_GAIA
/******************************************************************************************/
/* -------------------------- TRACER SETUP -------------------------------------*/
/******************************************************************************************/
/// tracer enable/disable
#if defined(CFG_TRC_EN)
#define TRACER_PRESENT 1
#include "dbg_trc_config.h"
#else
#define TRACER_PRESENT 0
#endif // CFG_TRC_EN
/******************************************************************************************/
/* ------------------------- DEEP SLEEP SETUP -------------------------------------*/
/******************************************************************************************/
#if (RC_32K || XTAL_32K)
/// Use 32K Hz Clock if set to 1 else 32,768k is used
#define HZ32000 (1)
#endif //(RC_32K || XTAL_32K)
#if (XTAL_32768K)
#define HZ32000 (0)
#endif // (XTAL_32768K)
/// Time to wake-up Radio Module (in us)
#define SLEEP_RM_WAKEUP_DELAY 625
/// Time for stabilization of the high frequency oscillator following a sleep-timer expiry (in us)
#define SLEEP_OSC_NORMAL_WAKEUP_DELAY 5000
/// Time for stabilization of the high frequency oscillator following an external wake-up request (in us)
#define SLEEP_OSC_EXT_WAKEUP_DELAY 5000
/******************************************************************************************/
/* -------------------------- BASEBAND SETUP -------------------------------------*/
/******************************************************************************************/
/// Default programming delay, margin for programming the baseband in advance of each activity (in half-slots)
#define IP_PROG_DELAY_DFT (3)
/**
* Prefetch time (in us)
* - Radio power up: 60us (worst case)
* - EM fetch: 30us (worst case at 26Mhz)
* - HW logic: 10us (worst case at 26Mhz)
*/
#define IP_PREFETCH_TIME_US (260)
/**
* Prefetch Abort time (in us)
*
* - EM fetch:
* - HW CS Update is 18 access
* - HW Tx Desc Update is 1 access
* - HW Rx Desc Update is 5 access
* => EM update at 26MHz Tx, Rx and CS is (18+1+5)*0.04*4 = 4us
* - HW logic: 10us (worst case)
* - Radio power down: 26 us for Ripple
*
* Prefetch abort time = prefetch time + 4 + 10 + 26
*/
#define IP_PREFETCHABORT_TIME_US (340)
/******************************************************************************************/
/* -------------------------- RADIO SETUP ----------------------------------------*/
/******************************************************************************************/
/// Power control features
#define RF_TXPWR 1
/// Class of device
#define RF_CLASS1 0
/******************************************************************************************/
/* ------------------------- SUPPORTED RADIO PHY ------------------------------------*/
/******************************************************************************************/
#if defined(CFG_RF_ATLAS)
#define BLE_PHY_1MBPS_SUPPORT 1
#define BLE_PHY_2MBPS_SUPPORT 1
#define BLE_PHY_CODED_SUPPORT 1
#define BLE_STABLE_MOD_IDX_TX_SUPPORT 0
#define BLE_STABLE_MOD_IDX_RX_SUPPORT 0
#define BLE_PWR_CLASS_1_SUPPORT 0
#elif defined(CFG_RF_BTIPT)
#define BLE_PHY_1MBPS_SUPPORT 1
#define BLE_PHY_2MBPS_SUPPORT 1
#define BLE_PHY_CODED_SUPPORT 1
#define BLE_STABLE_MOD_IDX_TX_SUPPORT 0
#define BLE_STABLE_MOD_IDX_RX_SUPPORT 0
#define BLE_PWR_CLASS_1_SUPPORT 0
#elif defined(CFG_RF_CALYPSO)
#define BLE_PHY_1MBPS_SUPPORT 1
#define BLE_PHY_2MBPS_SUPPORT 1
#define BLE_PHY_CODED_SUPPORT 1
#define BLE_STABLE_MOD_IDX_TX_SUPPORT 0
#define BLE_STABLE_MOD_IDX_RX_SUPPORT 0
#define BLE_PWR_CLASS_1_SUPPORT 0
#elif defined(CFG_RF_EXTRC)
#define BLE_PHY_1MBPS_SUPPORT 1
#define BLE_PHY_2MBPS_SUPPORT 0
#define BLE_PHY_CODED_SUPPORT 0
#define BLE_STABLE_MOD_IDX_TX_SUPPORT 0
#define BLE_STABLE_MOD_IDX_RX_SUPPORT 0
#define BLE_PWR_CLASS_1_SUPPORT 0
#else // RIPPLE
#define BLE_PHY_1MBPS_SUPPORT 1
#define BLE_PHY_2MBPS_SUPPORT 0
#define BLE_PHY_CODED_SUPPORT 1
#define BLE_STABLE_MOD_IDX_TX_SUPPORT 0
#define BLE_STABLE_MOD_IDX_RX_SUPPORT 0
#define BLE_PWR_CLASS_1_SUPPORT 0
#endif
/******************************************************************************************/
/* ------------------------- COEXISTENCE SETUP ------------------------------------*/
/******************************************************************************************/
/// WLAN Coexistence
#if defined(CFG_WLAN_COEX)
#define RW_WLAN_COEX 1
#define RW_WLAN_COEX_TEST (defined(CFG_WLAN_COEX_TEST))
#else
#define RW_WLAN_COEX 0
#define RW_WLAN_COEX_TEST 0
#endif // defined(CFG_WLAN_COEX)
/// MWS Coexistence
#if defined(CFG_MWS_COEX)
#define RW_MWS_COEX 1
#define RW_MWS_COEX_TEST (defined(CFG_MWS_COEX_TEST))
#else
#define RW_MWS_COEX 0
#define RW_MWS_COEX_TEST 0
#endif // defined(CFG_MWS_COEX)
/******************************************************************************************/
/* ------------------------ RSSI & POWER CONTROL -------------------------------------*/
/******************************************************************************************/
#if BLE_PWR_CTRL
/// RSSI averaging weight (2^N)
/*
* Calculate an RSSI average based on a weighted history of RSSI values (RW proprietary method):
* A weight of 2 (2^2 = 4) provides a weighted averaging at 25%, 18.5%, 14%, 10.5%, 8%, 6%, 4.5%, 3.3%, 2.5%...
* A weight of 3 (2^3 = 8) provides a weighted averaging at 12.5%, 10.9%, 9.6%, 8.3%, 7.3%, 6.4%, 5.6%, 4.9%, 4.3%...
*/
#define RW_RSSI_AV_WEIGHT 2
/// RSSI APR target within golden receive window
#define RW_RSSI_APR_TARGET (10) // 10 dBm threshold
#endif // BLE_PWR_CTRL
/******************************************************************************************/
/* ----------------------- SLOT AVAILABILITY MASKS -----------------------------------*/
/******************************************************************************************/
/// Maximum support peer SAM map size
#define RW_MAX_PEER_SAM_MAP_SLOTS (256)
#define RW_PEER_SAM_MAP_MAX_LEN (RW_MAX_PEER_SAM_MAP_SLOTS/4) // 2-bit field per slot
/******************************************************************************************/
/* -------------------- SECURE CONNECTIONS SETUP --------------------------------------*/
/******************************************************************************************/
#if defined(CFG_ECC_16_BITS_ALGO)
#define ECC_MULT_ALGO_TYPE (16)
#else // !defined(CFG_ECC_16_BITS_ALGO)
#define ECC_MULT_ALGO_TYPE (32)
#endif // defined(CFG_ECC_16_BITS_ALGO)
#if defined(CFG_CRYPTO_UT)
#define CRYPTO_UT (1)
#else //defined(CFG_CRYPTO_UT)
#define CRYPTO_UT (0)
#endif //defined(CFG_CRYPTO_UT)
/******************************************************************************************/
/* -------------------------- DEBUG SETUP ----------------------------------------*/
/******************************************************************************************/
/// Flag indicating if debug mode is activated or not
#if defined(CFG_DBG)
#define RW_DEBUG ((BLE_EMB_PRESENT) || (BT_EMB_PRESENT) || (BLE_HOST_PRESENT))
#if (BLE_EMB_PRESENT || BT_EMB_PRESENT)
#define RW_SWDIAG 1
#else
#define RW_SWDIAG 0
#endif
#define KE_PROFILING 1
#else
#define RW_DEBUG 0
#define RW_SWDIAG 0
#define KE_PROFILING 0
#endif /* CFG_DBG */
/// Flag indicating if Read/Write memory commands are supported or not
#if defined(CFG_DBG_MEM)
#define RW_DEBUG_MEM 1
#else //CFG_DBG_MEM
#define RW_DEBUG_MEM 0
#endif //CFG_DBG_MEM
/// Flag indicating if Flash debug commands are supported or not
#if defined(CFG_DBG_FLASH)
#define RW_DEBUG_FLASH 1
#else //CFG_DBG_FLASH
#define RW_DEBUG_FLASH 0
#endif //CFG_DBG_FLASH
/// Flag indicating if CPU stack profiling commands are supported or not
#if defined(CFG_DBG_STACK_PROF)
#define RW_DEBUG_STACK_PROF 1
#else
#define RW_DEBUG_STACK_PROF 0
#endif // defined (CFG_DBG_STACK_PROF)
/// Scheduling Planner unit test (HCI debug commands to test scheduling planner functions)
#define SCH_PLAN_UT (1)
/// BLE I&Q sample Generator control interface
#define BLE_IQ_GEN (RW_DEBUG && (BLE_CON_CTE_REQ | BLE_CONLESS_CTE_RX))
/******************************************************************************************/
/* -------------------------- VS SETUP --------------------------------------*/
/******************************************************************************************/
/// Read piconnect clock
#if defined (CFG_BT_READ_PICONET_CLOCK)
#define BT_READ_PICONET_CLOCK 1
#else
#define BT_READ_PICONET_CLOCK 0
#endif //defined (CFG_BT_READ_PICONET_CLOCK)
/******************************************************************************************/
/* -------------------------- NVDS SETUP --------------------------------------*/
/******************************************************************************************/
/// Flag indicating if NVDS feature is supported or not
#if defined(CFG_NVDS)
#define NVDS_SUPPORT 1
#else //CFG_DBG_NVDS
#define NVDS_SUPPORT 0
#endif //CFG_DBG_NVDS
/******************************************************************************************/
/* -------------------------- MISC SETUP --------------------------------------*/
/******************************************************************************************/
/// Manufacturer: RivieraWaves SAS
#define RW_COMP_ID 0x0060
/******************************************************************************************/
/* ------------------------- BT / BLE / BLE HL CONFIG -------------------------------*/
/******************************************************************************************/
#if (BT_EMB_PRESENT)
#include "rwbt_config.h" // bt stack configuration
#endif //BT_EMB_PRESENT
#if (BLE_EMB_PRESENT)
#include "rwble_config.h" // ble stack configuration
#endif //BLE_EMB_PRESENT
#if (BLE_HOST_PRESENT)
#include "rwble_hl_config.h" // ble Host stack configuration
#endif //BLE_HOST_PRESENT
#if defined(CFG_APP)
#include "rwapp_config.h" // Application configuration
#endif // defined(CFG_APP)
/******************************************************************************************/
/* ------------------------- KERNEL SETUP -------------------------------------*/
/******************************************************************************************/
/// Event types definition
/*@TRACE*/
enum KE_EVENT_TYPE
{
#if DISPLAY_SUPPORT
KE_EVENT_DISPLAY,
#endif //DISPLAY_SUPPORT
#if RTC_SUPPORT
KE_EVENT_RTC_1S_TICK,
#endif //RTC_SUPPORT
#if BLE_ISO_MODE_0_RSA
KE_EVENT_RSA_SIGN,
#endif //BLE_ISO_MODE_0_RSA
/// ECDH background event
KE_EVENT_ECC_MULTIPLICATION,
#if BT_EMB_PRESENT
KE_EVENT_P192_PUB_KEY_GEN,
#endif // BT_EMB_PRESENT
#if (TRACER_PRESENT)
KE_EVENT_TRC,
#endif /*(TRACER_PRESENT)*/
/// Delayed job handler
KE_EVENT_DJOB,
/// Message handling
KE_EVENT_KE_MESSAGE,
#if (BLE_EMB_PRESENT || BT_EMB_PRESENT)
/// Handle AES result
KE_EVENT_AES_END,
#endif // (BLE_EMB_PRESENT || BT_EMB_PRESENT)
// #if H4TL_SUPPORT
KE_EVENT_H4TL_TX,
#if (BLE_EMB_PRESENT || BT_EMB_PRESENT)
KE_EVENT_H4TL_CMD_HDR_RX,
KE_EVENT_H4TL_CMD_PLD_RX,
#endif //(BLE_EMB_PRESENT || BT_EMB_PRESENT)
#if (((BLE_EMB_PRESENT || BLE_HOST_PRESENT) && (BLE_CENTRAL || BLE_PERIPHERAL)) || BT_EMB_PRESENT)
KE_EVENT_H4TL_ACL_HDR_RX,
#endif //(((BLE_EMB_PRESENT || BLE_HOST_PRESENT) && (BLE_CENTRAL || BLE_PERIPHERAL)) || BT_EMB_PRESENT)
// #endif //H4TL_SUPPORT
#if BT_EMB_PRESENT
KE_EVENT_BT_PSCAN_PROC,
#endif //BT_EMB_PRESENT
/// Timer handler
KE_EVENT_TIMER,
#if (BLE_ISOOHCI)
KE_EVENT_ISOOHCI_IN_DEFER,
KE_EVENT_ISOOHCI_OUT_DEFER,
#endif //(BLE_ISOOHCI)
KE_EVENT_MAX,
};
/// Tasks types definition
/*@TRACE*/
enum KE_TASK_TYPE
{
#if (BT_EMB_PRESENT)
// BT Controller Tasks
TASK_LM,
TASK_LC,
TASK_LB,
#endif // (BT_EMB_PRESENT)
#if (BLE_EMB_PRESENT)
// Link Layer Tasks
TASK_LLM,
TASK_LLC,
#if (BLE_ISO_PRESENT)
TASK_LLI,
#endif // (BLE_ISO_PRESENT)
#endif // (BLE_EMB_PRESENT)
#if ((BLE_EMB_PRESENT) || (BT_EMB_PRESENT))
TASK_DBG,
#endif // ((BLE_EMB_PRESENT) || (BT_EMB_PRESENT))
#if (DISPLAY_SUPPORT)
TASK_DISPLAY,
#endif // (DISPLAY_SUPPORT)
#if (BLE_APP_PRESENT)
TASK_APP,
#endif // (BLE_APP_PRESENT)
#if (BLE_HOST_PRESENT)
TASK_L2CAP, // L2CAP Task
#if (BLE_HL_MSG_API)
TASK_GATT, // Generic Attribute Profile
#endif // (BLE_HL_MSG_API)
TASK_GAPM, // Generic Access Profile Manager
TASK_GAPC, // Generic Access Profile Controller
#if (BLE_HL_MSG_API)
// allocate a certain number of profiles task
TASK_PRF_MAX = (TASK_GAPC + BLE_NB_PROFILES),
#endif // (BLE_HL_MSG_API)
#endif // (BLE_HOST_PRESENT)
#if (AHI_TL_SUPPORT)
TASK_AHI,
#endif // (AHI_TL_SUPPORT)
#if (BLE_GAF_PRESENT)
TASK_GAF,
#endif //(BLE_GAF_PRESENT)
/// Maximum number of tasks
TASK_MAX,
TASK_NONE = 0xFF,
};
/// Kernel memory heaps types.
/*@TRACE*/
enum KE_MEM_HEAP
{
/// Memory allocated for environment variables
KE_MEM_ENV,
#if (BLE_HOST_PRESENT)
/// Memory allocated for Attribute database
KE_MEM_ATT_DB,
#endif // (BLE_HOST_PRESENT)
/// Memory allocated for kernel messages
KE_MEM_KE_MSG,
/// Non Retention memory block
KE_MEM_NON_RETENTION,
KE_MEM_BLOCK_MAX,
};
#if (BT_EMB_PRESENT)
#define BT_HEAP_MSG_SIZE_ BT_HEAP_MSG_SIZE
#define BT_HEAP_ENV_SIZE_ BT_HEAP_ENV_SIZE
#else
#define BT_HEAP_MSG_SIZE_ 0
#define BT_HEAP_ENV_SIZE_ 0
#endif //BT_EMB_PRESENT
#if (BLE_EMB_PRESENT)
#define BLE_HEAP_MSG_SIZE_ BLE_HEAP_MSG_SIZE
#define BLE_HEAP_ENV_SIZE_ BLE_HEAP_ENV_SIZE
#else
#define BLE_HEAP_MSG_SIZE_ 0
#define BLE_HEAP_ENV_SIZE_ 0
#endif //BLE_EMB_PRESENT
#if (BLE_HOST_PRESENT)
#define BLEHL_HEAP_MSG_SIZE_ BLEHL_HEAP_MSG_SIZE
#define BLEHL_HEAP_ENV_SIZE_ BLEHL_HEAP_ENV_SIZE
#define BLEHL_HEAP_DB_SIZE_ BLEHL_HEAP_DB_SIZE
#else
#define BLEHL_HEAP_MSG_SIZE_ 0
#define BLEHL_HEAP_ENV_SIZE_ 0
#define BLEHL_HEAP_DB_SIZE_ 0
#endif //BLE_HOST_PRESENT
#if (BT_EMB_PRESENT || BLE_EMB_PRESENT)
#define ECC_HEAP_NON_RET_SIZE_ (328*2) // Could only have 2 ECC computations simultaneously
#else // (BT_EMB_PRESENT || BLE_EMB_PRESENT)
#define ECC_HEAP_NON_RET_SIZE_ (0)
#endif // (BT_EMB_PRESENT || BLE_EMB_PRESENT)
/// Kernel Message Heap
#define RWIP_HEAP_MSG_SIZE ( BT_HEAP_MSG_SIZE_ + \
BLE_HEAP_MSG_SIZE_ + \
BLEHL_HEAP_MSG_SIZE_ )
/// Size of Environment heap
#define RWIP_HEAP_ENV_SIZE ( BT_HEAP_ENV_SIZE_ + \
BLE_HEAP_ENV_SIZE_ + \
BLEHL_HEAP_ENV_SIZE_ )
/// Size of Attribute database heap
#define RWIP_HEAP_DB_SIZE ( BLEHL_HEAP_DB_SIZE_ )
/**
* Size of non-retention heap
*
* This heap can be used to split the RAM into 2 parts:
* - an always-on part that can handle a certain number of links
* - a secondary memory that could be powered-off when not used, and retained only when used
*
* With such mechanism, the previous heaps need to be reduced so that they can contain all required data
* in a light scenario (few connections, few profiles). Then the non-retention heap is sized in order to
* cover the worst case scenario (max connections, max profiles, etc ...)
*
* The current size show what is already known as not needing to be retained during deep sleep.
*/
#define RWIP_HEAP_NON_RET_SIZE ( ECC_HEAP_NON_RET_SIZE_ )
/// Minimum sleep time to enter in deep sleep (in half slot).
// #define RWIP_MINIMUM_SLEEP_TIME (1)
#define RWIP_MINIMUM_SLEEP_TIME (20)
/******************************************************************************************/
/* ------------------------- CONFIGURABLE PARAMETERS -----------------------------*/
/******************************************************************************************/
/// Bit field definitions for channel assessment enable parameter
enum param_ch_ass_en
{
/// Indicate channel assessment enabled for BLE
CH_ASS_EN_BLE_POS = 0,
CH_ASS_EN_BLE_BIT = (0x1),
/// Indicate channel assessment enabled for BT
CH_ASS_EN_BT_POS = 1,
CH_ASS_EN_BT_BIT = (0x2),
};
/// List of parameters identifiers
enum PARAM_ID
{
/// Definition of the tag associated to each parameters
/// Local Bd Address
PARAM_ID_BD_ADDRESS = 0x01,
/// Device Name
PARAM_ID_DEVICE_NAME = 0x02,
/// Low Power Clock Drift
PARAM_ID_LPCLK_DRIFT = 0x07,
/// Low Power Clock Jitter
PARAM_ID_LPCLK_JITTER = 0x08,
/// Active Clock Drift
PARAM_ID_ACTCLK_DRIFT = 0x09,
/// External wake-up time
PARAM_ID_EXT_WAKEUP_TIME = 0x0D,
/// Oscillator wake-up time
PARAM_ID_OSC_WAKEUP_TIME = 0x0E,
/// Radio wake-up time
PARAM_ID_RM_WAKEUP_TIME = 0x0F,
/// UART baudrate
PARAM_ID_UART_BAUDRATE = 0x10,
/// Enable sleep mode
PARAM_ID_SLEEP_ENABLE = 0x11,
/// Enable External Wakeup
PARAM_ID_EXT_WAKEUP_ENABLE = 0x12,
/// SP Private Key 192
PARAM_ID_SP_PRIVATE_KEY_P192 = 0x13,
/// SP Public Key 192
PARAM_ID_SP_PUBLIC_KEY_P192 = 0x14,
/// Activity Move Configuration (enables/disables activity move for BLE connections and BT (e)SCO links)
PARAM_ID_ACTIVITY_MOVE_CONFIG = 0x15,
/// Enable/disable scanning for extended advertising PDUs
PARAM_ID_SCAN_EXT_ADV = 0x16,
/// Duration of the schedule reservation for long activities such as scan, inquiry, page, HDC advertising
PARAM_ID_SCHED_SCAN_DUR = 0x17,
/// Programming delay, margin for programming the baseband in advance of each activity (in half-slots)
PARAM_ID_PROG_DELAY = 0x18,
/// Enable/disable channel assessment for BT and/or BLE
PARAM_ID_CH_ASS_EN = 0x19,
/// Default MD bit used by slave when sending a data packet on a BLE connection
PARAM_ID_DFT_SLAVE_MD = 0x20,
/// Synchronous links configuration
PARAM_ID_SYNC_CONFIG = 0x2C,
/// PCM Settings
PARAM_ID_PCM_SETTINGS = 0x2D,
/// Sleep algorithm duration
PARAM_ID_SLEEP_ALGO_DUR = 0x2E,
/// Tracer configuration
PARAM_ID_TRACER_CONFIG = 0x2F,
/// Diagport configuration
PARAM_ID_DIAG_BT_HW = 0x30,
PARAM_ID_DIAG_BLE_HW = 0x31,
PARAM_ID_DIAG_SW = 0x32,
PARAM_ID_DIAG_DM_HW = 0x33,
PARAM_ID_DIAG_PLF = 0x34,
/// IDC selection (for audio demo)
PARAM_ID_IDCSEL_PLF = 0x37,
/// RSSI threshold tags
PARAM_ID_RSSI_HIGH_THR = 0x3A,
PARAM_ID_RSSI_LOW_THR = 0x3B,
PARAM_ID_RSSI_INTERF_THR = 0x3C,
/// RF BTIPT
PARAM_ID_RF_BTIPT_VERSION = 0x3E,
PARAM_ID_RF_BTIPT_XO_SETTING = 0x3F,
PARAM_ID_RF_BTIPT_GAIN_SETTING = 0x40,
PARAM_ID_BT_LINK_KEY_FIRST = 0x60,
PARAM_ID_BT_LINK_KEY_LAST = 0x67,
PARAM_ID_BLE_LINK_KEY_FIRST = 0x70,
PARAM_ID_BLE_LINK_KEY_LAST = 0x7F,
/// SC Private Key (Low Energy)
PARAM_ID_LE_PRIVATE_KEY_P256 = 0x80,
/// SC Public Key (Low Energy)
PARAM_ID_LE_PUBLIC_KEY_P256 = 0x81,
/// SC Debug: Used Fixed Private Key from NVDS (Low Energy)
PARAM_ID_LE_DBG_FIXED_P256_KEY = 0x82,
/// SP Private Key (classic BT)
PARAM_ID_SP_PRIVATE_KEY_P256 = 0x83,
/// SP Public Key (classic BT)
PARAM_ID_SP_PUBLIC_KEY_P256 = 0x84,
/// LE Coded PHY 500 Kbps selection
PARAM_ID_LE_CODED_PHY_500 = 0x85,
/// Application specific
PARAM_ID_APP_SPECIFIC_FIRST = 0x90,
PARAM_ID_APP_SPECIFIC_LAST = 0xAF,
};
/// List of parameters lengths
enum PARAM_LEN
{
// Definition of length associated to each parameters
/// Local Bd Address
PARAM_LEN_BD_ADDRESS = 6,
/// Device Name
PARAM_LEN_DEVICE_NAME = 248,
/// Low power clock drift
PARAM_LEN_LPCLK_DRIFT = 2,
/// Low power clock jitter
PARAM_LEN_LPCLK_JITTER = 1,
/// Active clock drift
PARAM_LEN_ACTCLK_DRIFT = 1,
/// External wake-up time
PARAM_LEN_EXT_WAKEUP_TIME = 2,
/// Oscillator wake-up time
PARAM_LEN_OSC_WAKEUP_TIME = 2,
/// Radio wake-up time
PARAM_LEN_RM_WAKEUP_TIME = 2,
/// UART baudrate
PARAM_LEN_UART_BAUDRATE = 4,
/// Enable sleep mode
PARAM_LEN_SLEEP_ENABLE = 1,
/// Enable External Wakeup
PARAM_LEN_EXT_WAKEUP_ENABLE = 1,
/// SP Private Key 192
PARAM_LEN_SP_PRIVATE_KEY_P192 = 24,
/// SP Public Key 192
PARAM_LEN_SP_PUBLIC_KEY_P192 = 48,
/// Activity Move Configuration
PARAM_LEN_ACTIVITY_MOVE_CONFIG = 1,
/// Enable/disable scanning for extended advertising PDUs
PARAM_LEN_SCAN_EXT_ADV = 1,
/// Duration of the schedule reservation for long activities such as scan, inquiry, page, HDC advertising
PARAM_LEN_SCHED_SCAN_DUR = 2,
/// Programming delay, margin for programming the baseband in advance of each activity (in half-slots)
PARAM_LEN_PROG_DELAY = 1,
/// Enable/disable channel assessment for BT and/or BLE
PARAM_LEN_CH_ASS_EN = 1,
/// Default MD bit used by slave when sending a data packet on a BLE connection
PARAM_LEN_DFT_SLAVE_MD = 1,
/// Synchronous links configuration
PARAM_LEN_SYNC_CONFIG = 2,
/// PCM Settings
PARAM_LEN_PCM_SETTINGS = 8,
/// Tracer configuration
PARAM_LEN_TRACER_CONFIG = 4,
/// Diagport configuration
PARAM_LEN_DIAG_BT_HW = 4,
PARAM_LEN_DIAG_BLE_HW = 4,
PARAM_LEN_DIAG_SW = 4,
PARAM_LEN_DIAG_DM_HW = 4,
PARAM_LEN_DIAG_PLF = 4,
/// IDC selection (for audio demo)
PARAM_LEN_IDCSEL_PLF = 4,
/// RSSI thresholds
PARAM_LEN_RSSI_THR = 1,
/// RF BTIPT
PARAM_LEN_RF_BTIPT_VERSION = 1,
PARAM_LEN_RF_BTIPT_XO_SETTING = 1,
PARAM_LEN_RF_BTIPT_GAIN_SETTING = 2,
/// Link keys
PARAM_LEN_BT_LINK_KEY = 22,
PARAM_LEN_BLE_LINK_KEY = 48,
/// P256
PARAM_LEN_PRIVATE_KEY_P256 = 32,
PARAM_LEN_PUBLIC_KEY_P256 = 64,
PARAM_LEN_DBG_FIXED_P256_KEY = 1,
/// LE Coded PHY 500 Kbps selection
PARAM_LEN_LE_CODED_PHY_500 = 1,
};
/******************************************************************************************/
/* ------------------------- BT-BLE COEX -----------------------------------*/
/******************************************************************************************/
///To let the HW using the default values set in the registers
#define RW_BLE_PTI_PRIO_AUTO 15
#if (BLE_EMB_PRESENT || BT_EMB_PRESENT)
/// Enable and diable definition for the PTI
///Enable TX busy signal
#define RWIP_PTI_TXEN 1
///Disable TX busy signal
#define RWIP_PTI_TXDIS 0
/// Tx busy position
#define RWIP_TXBSY_POS 0
///Enable RX busy signal
#define RWIP_PTI_RXEN 1
///Disable RX busy signal
#define RWIP_PTI_RXDIS 0
/// Rx busy position
#define RWIP_RXBSY_POS 1
///Enable do not abort TX
#define RWIP_PTI_DNABORTEN 1
///Disable do not abort TX
#define RWIP_PTI_DNABORTDIS 0
/// Do not abort busy position
#define RWIP_DNABORT_POS 2
/// SAM disabled
#define RWIP_SAM_DIS 0
/// SAM enabled
#define RWIP_SAM_EN 1
/// SAM enable position
#define RWIP_SAMEN_POS 3
/// Bit masking
#define RWIP_COEX_BIT_MASK 1
/// Coex configuration index
enum rwip_coex_config_idx
{
#if (BT_EMB_PRESENT)
RWIP_COEX_MSSWITCH_IDX,
RWIP_COEX_SNIFFATT_IDX,
RWIP_COEX_PAGE_IDX,
RWIP_COEX_PSCAN_IDX,
RWIP_COEX_INQ_IDX,
RWIP_COEX_INQRES_IDX,
RWIP_COEX_SCORSVD_IDX,
RWIP_COEX_BCAST_IDX,
RWIP_COEX_CONNECT_IDX,
#endif //#if (BT_EMB_PRESENT)
#if (BLE_EMB_PRESENT)
RWIP_COEX_CON_IDX,
RWIP_COEX_CON_DATA_IDX,
RWIP_COEX_ADV_IDX,
RWIP_COEX_SCAN_IDX,
RWIP_COEX_INIT_IDX,
#endif // #if (BLE_EMB_PRESENT)
/// Max configuration index
RWIP_COEX_CFG_MAX,
};
#endif //(BLE_EMB_PRESENT || BT_EMB_PRESENT)
/******************************************************************************************/
/* ------------------------- BT-BLE PRIORITIES -----------------------------------*/
/******************************************************************************************/
#if (BLE_EMB_PRESENT || BT_EMB_PRESENT)
/// Priority index definition
enum rwip_prio_idx
{
#if (BT_EMB_PRESENT)
/// ACL event default priority
RWIP_PRIO_ACL_DFT_IDX,
/// ACL event priority with activity
RWIP_PRIO_ACL_ACT_IDX,
/// ACL Role Switch event default priority
RWIP_PRIO_ACL_RSW_IDX,
/// ACL sniff event default priority
RWIP_PRIO_ACL_SNIFF_DFT_IDX,
/// ACL sniff transition event default priority
RWIP_PRIO_ACL_SNIFF_TRANS_IDX,
#if MAX_NB_SYNC
/// SCO event default priority
RWIP_PRIO_SCO_DFT_IDX,
#endif //MAX_NB_SYNC
/// Broadcast ACL event default priority
RWIP_PRIO_BCST_DFT_IDX,
/// Broadcast ACL event with LMP activity priority
RWIP_PRIO_BCST_ACT_IDX,
/// CSB RX event default priority
RWIP_PRIO_CSB_RX_DFT_IDX,
/// CSB TX event default priority
RWIP_PRIO_CSB_TX_DFT_IDX,
/// Inquiry event default priority
RWIP_PRIO_INQ_DFT_IDX,
/// Inquiry Scan event default priority
RWIP_PRIO_ISCAN_DFT_IDX,
/// Page event default priority
RWIP_PRIO_PAGE_DFT_IDX,
/// Page event default priority
RWIP_PRIO_PAGE_1ST_PKT_IDX,
/// Page first packet event default priority
RWIP_PRIO_PCA_DFT_IDX,
/// Page scan event default priority
RWIP_PRIO_PSCAN_DFT_IDX,
/// Page scan event priority increment when canceled
RWIP_PRIO_PSCAN_1ST_PKT_IDX,
/// Synchronization Scan event default priority
RWIP_PRIO_SSCAN_DFT_IDX,
/// Synchronization Train event default priority
RWIP_PRIO_STRAIN_DFT_IDX,
#endif //#if (BT_EMB_PRESENT)
#if (BLE_EMB_PRESENT)
/// Default priority for scanning events
RWIP_PRIO_SCAN_IDX,
/// Default priority for auxillary scan/init (no_asap) rx events
RWIP_PRIO_AUX_RX_IDX,
/// Default priority for periodic adv rx events
RWIP_PRIO_PER_ADV_RX_DFT_IDX,
/// Default priority for initiating events
RWIP_PRIO_INIT_IDX,
/// LE connection events default priority
RWIP_PRIO_CONNECT_DFT_IDX,
/// LE connection events priority with activity
RWIP_PRIO_CONNECT_ACT_IDX,
/// Default priority for advertising events
RWIP_PRIO_ADV_IDX,
/// Default priority for advertising high duty cycle events
RWIP_PRIO_ADV_HDC_IDX,
/// Default priority for aux advertising events
RWIP_PRIO_ADV_AUX_IDX,
/// Default priority for periodic advertising events
RWIP_PRIO_PER_ADV_IDX,
/// Default priority for resolvable private addresses renewal event
RWIP_PRIO_RPA_RENEW_IDX,
#if (BLE_CIS)
/// Default priority for master CIS connect events
RWIP_PRIO_M_CIS_IDX,
/// Default priority for slave CIS connect events
RWIP_PRIO_S_CIS_IDX,
#endif // (BLE_CIS)
#if (BLE_BIS)
/// Default priority for master BIS events
RWIP_PRIO_M_BIS_IDX,
/// Default priority for slave BIS events
RWIP_PRIO_S_BIS_IDX,
/// Priority for Scanning activity
RWIP_PRIO_BIS_SCAN_IDX,
#endif // (BLE_BIS)
#endif // #if (BLE_EMB_PRESENT)
RWIP_PRIO_IDX_MAX
};
/// Default priority value definition
enum rwip_prio_dft
{
#if (BT_EMB_PRESENT)
/// ACL event default priority
RWIP_PRIO_ACL_DFT = 40,
/// ACL event priority with activity
RWIP_PRIO_ACL_ACT = 80,
/// ACL Role Switch event default priority
RWIP_PRIO_ACL_RSW = 160,
/// ACL sniff event default priority
RWIP_PRIO_ACL_SNIFF_DFT = 120,
/// ACL sniff transition event default priority
RWIP_PRIO_ACL_SNIFF_TRANS = 80,
#if MAX_NB_SYNC
/// SCO event default priority
RWIP_PRIO_SCO_DFT = 144,
#endif //MAX_NB_SYNC
/// Broadcast ACL event default priority
RWIP_PRIO_BCST_DFT = 40,
/// Broadcast ACL event with LMP activity priority
RWIP_PRIO_BCST_ACT = 80,
/// CSB RX event default priority
RWIP_PRIO_CSB_RX_DFT = 80,
/// CSB TX event default priority
RWIP_PRIO_CSB_TX_DFT = 80,
/// Inquiry event default priority
RWIP_PRIO_INQ_DFT = 40,
/// Inquiry Scan event default priority
RWIP_PRIO_ISCAN_DFT = 40,
/// Page event default priority
RWIP_PRIO_PAGE_DFT = 64,
/// Page first packet event default priority
RWIP_PRIO_PAGE_1ST_PKT = 160,
/// PCA event default priority
RWIP_PRIO_PCA_DFT = 160,
/// Page scan event default priority
RWIP_PRIO_PSCAN_DFT = 64,
/// Page scan event priority increment when canceled
RWIP_PRIO_PSCAN_1ST_PKT = 160,
/// Synchronization Scan event default priority
RWIP_PRIO_SSCAN_DFT = 80,
/// Synchronization Train event default priority
RWIP_PRIO_STRAIN_DFT = 80,
#endif //#if (BT_EMB_PRESENT)
#if (BLE_EMB_PRESENT)
/// Default priority for scanning events
RWIP_PRIO_SCAN_DFT = 40,
/// Default priority for auxillary scan/init (no_asap) rx events
RWIP_PRIO_AUX_RX_DFT = 96,
/// Default priority for periodic adv rx events
RWIP_PRIO_PER_ADV_RX_DFT = 128,
/// Default priority for initiating events
RWIP_PRIO_INIT_DFT = 80,
/// LE connection events default priority
RWIP_PRIO_CONNECT_DFT = 112,
/// LE connection events priority with activity
RWIP_PRIO_CONNECT_ACT = 128,
/// Default priority for advertising events
RWIP_PRIO_ADV_DFT = 40,
/// Default priority for advertising high duty cycle events
RWIP_PRIO_ADV_HDC_DFT = 80,
/// Default priority for aux advertising events
RWIP_PRIO_ADV_AUX_DFT = 96,
/// Default priority for periodic advertising events
RWIP_PRIO_PER_ADV_DFT = 80,
/// Default priority for resolvable private addresses renewal event
RWIP_PRIO_RPA_RENEW_DFT = 80,
#if (BLE_CIS)
/// Default priority for Master CIS Connect
RWIP_PRIO_M_CIS_DFT = 160,
/// Default priority for Slave CIS Connect
RWIP_PRIO_S_CIS_DFT = 160,
#endif // (BLE_CIS)
#if (BLE_BIS)
/// Default priority for Master BIS
RWIP_PRIO_M_BIS_DFT = 160,
/// Default priority for Slave BIS
RWIP_PRIO_S_BIS_DFT = 160,
/// Default priority for Scanning activity
RWIP_PRIO_BIS_SCAN_DFT = 32,
#endif // (BLE_BIS)
#endif // #if (BLE_EMB_PRESENT)
/// Max priority
RWIP_PRIO_MAX = 255,
};
/// Default increment value definition
enum rwip_incr_dft
{
#if (BT_EMB_PRESENT)
/// ACL event default increment
RWIP_INCR_ACL_DFT = 8,
/// ACL event increment with activity
RWIP_INCR_ACL_ACT = 8,
/// ACL Role Switch event default increment
RWIP_INCR_ACL_RSW = 8,
/// ACL sniff event default increment
RWIP_INCR_ACL_SNIFF_DFT = 8,
/// ACL sniff transition event default increment
RWIP_INCR_ACL_SNIFF_TRANS = 8,
#if MAX_NB_SYNC
/// SCO event default increment
RWIP_INCR_SCO_DFT = 8,
#endif //MAX_NB_SYNC
/// Broadcast ACL event default increment
RWIP_INCR_BCST_DFT = 8,
/// Broadcast ACL event with LMP activity increment
RWIP_INCR_BCST_ACT = 8,
/// CSB RX event default increment
RWIP_INCR_CSB_RX_DFT = 8,
/// CSB TX event default increment
RWIP_INCR_CSB_TX_DFT = 8,
/// Inquiry event default increment
RWIP_INCR_INQ_DFT = 8,
/// Inquiry Scan event default increment
RWIP_INCR_ISCAN_DFT = 8,
/// Page event default increment
RWIP_INCR_PAGE_DFT = 8,
/// Page event default increment
RWIP_INCR_PAGE_1ST_PKT = 12,
/// Page first packet event default increment
RWIP_INCR_PCA_DFT = 8,
/// Page scan event default increment
RWIP_INCR_PSCAN_DFT = 8,
/// Page scan event increment increment when canceled
RWIP_INCR_PSCAN_1ST_PKT = 8,
/// Synchronization Scan event default increment
RWIP_INCR_SSCAN_DFT = 8,
/// Synchronization Train event default increment
RWIP_INCR_STRAIN_DFT = 8,
#endif //#if (BT_EMB_PRESENT)
#if (BLE_EMB_PRESENT)
/// Default increment for scanning events
RWIP_INCR_SCAN_DFT = 8,
/// Default increment for auxillary scan/init (no_asap) rx events
RWIP_INCR_AUX_RX_DFT = 8,
/// Default increment for periodic adv rx events
RWIP_INCR_PER_ADV_RX_DFT = 8,
/// Default increment for initiating events
RWIP_INCR_INIT_DFT = 8,
/// LE connection events default increment
RWIP_INCR_CONNECT_DFT = 8,
/// LE connection events increment with activity
RWIP_INCR_CONNECT_ACT = 8,
/// Default increment for advertising events
RWIP_INCR_ADV_DFT = 8,
/// Default increment for advertising high duty cycle events
RWIP_INCR_ADV_HDC_PRIO_DFT = 8,
/// Default increment for aux advertising events
RWIP_INCR_ADV_AUX_DFT = 8,
/// Default increment for periodic advertising events
RWIP_INCR_PER_ADV_DFT = 8,
/// Default increment for resolvable private addresses renewal event
RWIP_INCR_RPA_RENEW_DFT = 8,
#if (BLE_CIS)
/// Default priority for Master CIS Connect
RWIP_INCR_M_CIS_DFT = 8,
/// Default priority for Slave CIS Connect
RWIP_INCR_S_CIS_DFT = 8,
#endif // (BLE_CIS)
#if (BLE_BIS)
/// Default priority for Master BIS
RWIP_INCR_M_BIS_DFT = 8,
/// Default priority for Slave BIS
RWIP_INCR_S_BIS_DFT = 8,
/// Default priority increment for Scanning procedure
RWIP_INCR_BIS_SCAN_DFT = 8,
#endif // (BLE_BIS)
#endif // #if (BLE_EMB_PRESENT)
};
#endif //#if (BLE_EMB_PRESENT || BT_EMB_PRESENT)
/// @} BT Stack Configuration
/// @} ROOT
#endif //RWIP_CONFIG_H_
Reference in New Issue View Git Blame Copy Permalink